ORCID Profile
0000-0002-6945-8541
Current Organisation
Murdoch University
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Elsevier BV
Date: 02-2021
DOI: 10.1016/J.NANO.2020.102331
Abstract: AgNPs@Chitosan and Co
Publisher: Elsevier BV
Date: 12-2020
Publisher: Wiley
Date: 12-02-2023
Abstract: Oxidative damage and infection can prevent or delay tissue repair. Moreover, infection reinforces reactive oxygen species (ROS) formation, which makes the wound's condition even worse. Therefore, the need for antioxidant and antibacterial agents is felt for tissue regeneration. There are emerging up‐and‐coming biomaterials that recapitulate both properties into a package, offering an effective solution to turn the wound back into a healing state. In this article, the principles of antioxidant and antibacterial activity are summarized. The review starts with biological aspects, getting the readers to familiarize themselves with tissue barriers against infection. This is followed by the chemistry and mechanism of action of antioxidant and antibacterial materials (dual function). Eventually, the outlook and challenges are underlined to provide where the dual‐function biomaterials are and where they are going in the future. It is expected that the present article inspires the designing of dual‐function biomaterials to more advanced levels by providing the fundamentals and comparative points of view and paving the clinical way for these materials.
Publisher: Elsevier BV
Date: 04-2022
Publisher: Elsevier BV
Date: 08-2022
DOI: 10.1016/J.JHAZMAT.2022.129259
Abstract: Is it possible to accelerate cell internalization by hybridization of nanomaterials? Herein we support the realization of using metal-organic frameworks (MOFs) with the assistance of rigid porphyrin structure (H
Publisher: Research Square Platform LLC
Date: 09-11-2021
DOI: 10.21203/RS.3.RS-1021472/V1
Abstract: Venomous snakebite is an important cause of preventable death. The World Health Organization (WHO) set a goal to halve snakebite mortality by 2030. We used verbal autopsy and vital registration data to model the proportion of venomous animal deaths due to snakes by location, age, year, and sex, and applied these proportions to venomous animal contact mortality estimates from the Global Burden of Disease 2019 study. In 2019, 63,400 people (95% uncertainty interval 38,900–78,600) died globally from snakebites, which was equal to an age-standardized mortality rate (ASMR) of 0.8 deaths (0.5–1.0) per 100,000 and represents a 36% (2–49) decrease in ASMR since 1990. India had the greatest number of deaths in 2019, equal to an ASMR of 4.0 per 100,000 (2.3-5.0). We forecast mortality will continue to decline, but not sufficiently to meet the WHO’s goals. Improved data collection should be prioritized to help target interventions, improve burden estimation, and monitor progress.
Publisher: Informa UK Limited
Date: 05-01-2021
DOI: 10.1080/10408398.2020.1867958
Abstract: The therapeutic effects of carotenoids as dietary supplements to control or even treat some specific diseases including diabetic retinopathy, cardiovascular diseases, bacterial infections, as well as breast, prostate, and skin cancer are discussed in this review and also thoughts on future research for their widespread use are emphasized. From the stability standpoint, carotenoids have low bioavailability and bioaccessibility owing to their poor water solubility, deterioration in the presence of environmental stresses such as oxygen, light, and high heat as well as rapid degradation during digestion. Nanoencapsulation technologies as wall or encapsulation materials have been increasingly used for improving food product functionality. Nanoencapsulation is a versatile process employed for the protection, entrapment, and the delivery of food bioactive products including carotenoids from erse environmental conditions for extended shelf lives and for providing controlled release. Therefore, we present here, recent (mostly during the last five years) nanoencapsulation methods of carotenoids with various nanocarriers. To us, this review can be considered as the first highlighting not only the potential therapeutic effects of carotenoids on various diseases but also their most effective nanodelivery systems.HighlightsBioactive compounds are of deep interest to improve food properties.Carotenoids (such as β-carotene and xanthophylls) play indispensable roles in maintaining human health and well-being.A substantial research effort has been carried out on developing beneficial nanodelivery systems for various carotenoids.Nanoencapsulation of carotenoids can enhance their functional properties.Stable nanoencapsulated carotenoids could be utilized in food products.
Publisher: Elsevier BV
Date: 11-2022
DOI: 10.1016/J.JCONREL.2022.08.001
Abstract: The site-specific delivery of antitumor agents is of importance for providing effective cancer suppression. Poor bioavailability of anticancer compounds and the presence of biological barriers prevent their accumulation in tumor sites. These obstacles can be overcome using liposomal nanostructures. The challenges in cancer chemotherapy and stimuli-responsive nanocarriers are first described in the current review. Then, stimuli-responsive liposomes including pH-, redox-, enzyme-, light-, thermo- and magneto-sensitive nanoparticles are discussed and their potential for delivery of anticancer drugs is emphasized. The pH- or redox-sensitive liposomes are based on internal stimulus and release drug in response to a mildly acidic pH and GSH, respectively. The pH-sensitive liposomes can mediate endosomal escape via proton sponge. The multifunctional liposomes responsive to both redox and pH have more capacity in drug release at tumor site compared to pH- or redox-sensitive alone. The magnetic field and NIR irradiation can be exploited for external stimulation of liposomes. The light-responsive liposomes release drugs when they are exposed to irradiation thermosensitive-liposomes release drugs at a temperature of °C when there is hyperthermia magneto-responsive liposomes release drugs in presence of magnetic field. These smart nanoliposomes also mediate co-delivery of drugs and genes in synergistic cancer therapy. Due to lack of long-term toxicity of liposomes, they can be utilized in near future for treatment of cancer patients.
Publisher: IOP Publishing
Date: 24-08-2020
Abstract: Celiac disease is an autoimmune disorder represented by the ingestion of the gluten protein usually found in wheat, barley and rye. To date, ELISA has been the most accurate method for determining the presence of anti-gliadin, which is cumbersome, expensive (compared to a suspension microarray technique), and requires extensive s le preparation. In this study, in order to establish a more accurate assay to identify gliadin at lower concentrations, optical nano biosensors using an indirect immunoassay method for gliadin detection was designed and fabricated. For this, polycaprolactone (PCL) nano- to micro-beads were fabricated as a platform for the gliadin antigen which were optimized and nano functionalized with amine groups for such purposes. The gliadin antibody, which is selective to gliadin, was then added to the beads. Static light scattering tests were conducted to determine PCL particle size distribution and sizes were found from 0.1 to 30 μ m, which is suitable for flowcytometry detection devices. Anti-gliadin detection was performed using an anti IgG mouse antibody conjugated with FITC in a flow cytometry device to detect the smallest particle. Fluorescence intensity was investigated at different concentrations of anti-gliadin and a standard curve used to determine gluten concentration based on fluorescence intensity. Results showed that the fluorescence intensity increased with greater concentrations of anti-gliadin providing a very effective method of detection due to selectivity at a 5 ppm detection limit. This represents a new highly sensitive and fast method for anti-gliadin detection. Further, the disuse of a cross linker and the use of a dedicated antibody at a very low level (1 μ l) made this new method very economical to identify anti-gliadin concentrations at the nano level. In summary, this study provides a new, more accurate and sensitive, as well as less expensive system to detect anti-gliadin for the improved diagnosis of celiac disease.
Publisher: Ovid Technologies (Wolters Kluwer Health)
Date: 05-12-2021
Publisher: Springer Science and Business Media LLC
Date: 20-10-2023
Publisher: American Chemical Society (ACS)
Date: 24-06-2021
Publisher: Springer Science and Business Media LLC
Date: 15-05-2019
Publisher: BMJ
Date: 24-08-2020
DOI: 10.1136/INJURYPREV-2019-043531
Abstract: While there is a long history of measuring death and disability from injuries, modern research methods must account for the wide spectrum of disability that can occur in an injury, and must provide estimates with sufficient demographic, geographical and temporal detail to be useful for policy makers. The Global Burden of Disease (GBD) 2017 study used methods to provide highly detailed estimates of global injury burden that meet these criteria. In this study, we report and discuss the methods used in GBD 2017 for injury morbidity and mortality burden estimation. In summary, these methods included estimating cause-specific mortality for every cause of injury, and then estimating incidence for every cause of injury. Non-fatal disability for each cause is then calculated based on the probabilities of suffering from different types of bodily injury experienced. GBD 2017 produced morbidity and mortality estimates for 38 causes of injury. Estimates were produced in terms of incidence, prevalence, years lived with disability, cause-specific mortality, years of life lost and disability-adjusted life-years for a 28-year period for 22 age groups, 195 countries and both sexes. GBD 2017 demonstrated a complex and sophisticated series of analytical steps using the largest known database of morbidity and mortality data on injuries. GBD 2017 results should be used to help inform injury prevention policy making and resource allocation. We also identify important avenues for improving injury burden estimation in the future.
Publisher: IOP Publishing
Date: 2018
Publisher: Elsevier BV
Date: 06-2020
Publisher: IOP Publishing
Date: 2018
Publisher: IOP Publishing
Date: 2018
Publisher: IOP Publishing
Date: 2018
Publisher: Future Science Ltd
Date: 11-2022
Abstract: Advancements in nanotechnology have resulted in the introduction of several nonviral delivery vectors for the nontoxic, efficient delivery of encapsulated mRNA-based vaccines. Lipid- and polymer-based nanoparticles (NP) have proven to be the most potent delivery systems, providing increased delivery efficiency and protection of mRNA molecules from degradation. Here, the authors provide an overview of the recent studies carried out using lipid NPs and their functionalized forms, polymeric and lipid-polymer hybrid nanocarriers utilized mainly for the encapsulation of mRNAs for gene and immune therapeutic applications. A microfluidic system as a prevalent methodology for the preparation of NPs with continuous flow enables NP size tuning, rapid mixing and production reproducibility. Continuous-flow microfluidic devices for lipid and polymeric encapsulated RNA NP production are specifically reviewed.
Publisher: Elsevier BV
Date: 02-2021
Publisher: Springer Science and Business Media LLC
Date: 03-06-2021
DOI: 10.1038/S41562-021-01108-6
Abstract: Exclusive breastfeeding (EBF)—giving infants only breast-milk for the first 6 months of life—is a component of optimal breastfeeding practices effective in preventing child morbidity and mortality. EBF practices are known to vary by population and comparable subnational estimates of prevalence and progress across low- and middle-income countries (LMICs) are required for planning policy and interventions. Here we present a geospatial analysis of EBF prevalence estimates from 2000 to 2018 across 94 LMICs mapped to policy-relevant administrative units (for ex le, districts), quantify subnational inequalities and their changes over time, and estimate probabilities of meeting the World Health Organization’s Global Nutrition Target (WHO GNT) of ≥70% EBF prevalence by 2030. While six LMICs are projected to meet the WHO GNT of ≥70% EBF prevalence at a national scale, only three are predicted to meet the target in all their district-level units by 2030.
Publisher: Springer Science and Business Media LLC
Date: 26-04-2019
Publisher: Springer Science and Business Media LLC
Date: 19-12-2022
DOI: 10.1186/S12916-022-02639-Z
Abstract: Human immunodeficiency virus and acquired immune deficiency syndrome (HIV/AIDS) is still among the leading causes of disease burden and mortality in sub-Saharan Africa (SSA), and the world is not on track to meet targets set for ending the epidemic by the Joint United Nations Programme on HIV/AIDS (UNAIDS) and the United Nations Sustainable Development Goals (SDGs). Precise HIV burden information is critical for effective geographic and epidemiological targeting of prevention and treatment interventions. Age- and sex-specific HIV prevalence estimates are widely available at the national level, and region-wide local estimates were recently published for adults overall. We add further dimensionality to previous analyses by estimating HIV prevalence at local scales, stratified into sex-specific 5-year age groups for adults ages 15–59 years across SSA. We analyzed data from 91 seroprevalence surveys and sentinel surveillance among antenatal care clinic (ANC) attendees using model-based geostatistical methods to produce estimates of HIV prevalence across 43 countries in SSA, from years 2000 to 2018, at a 5 × 5-km resolution and presented among second administrative level (typically districts or counties) units. We found substantial variation in HIV prevalence across localities, ages, and sexes that have been masked in earlier analyses. Within-country variation in prevalence in 2018 was a median 3.5 times greater across ages and sexes, compared to for all adults combined. We note large within-district prevalence differences between age groups: for men, 50% of districts displayed at least a 14-fold difference between age groups with the highest and lowest prevalence, and at least a 9-fold difference for women. Prevalence trends also varied over time between 2000 and 2018, 70% of all districts saw a reduction in prevalence greater than five percentage points in at least one sex and age group. Meanwhile, over 30% of all districts saw at least a five percentage point prevalence increase in one or more sex and age group. As the HIV epidemic persists and evolves in SSA, geographic and demographic shifts in prevention and treatment efforts are necessary. These estimates offer epidemiologically informative detail to better guide more targeted interventions, vital for combating HIV in SSA.
Publisher: Informa UK Limited
Date: 03-2022
DOI: 10.2147/IJN.S353062
Publisher: Wiley
Date: 06-2023
DOI: 10.1002/CTD2.207
Publisher: IOP Publishing
Date: 24-10-2018
Publisher: Bentham Science Publishers Ltd.
Date: 11-06-2019
DOI: 10.2174/1573399814666180607075550
Abstract: Aptamers have several positive advantages that made them eminent as a potential factor in diagnosing and treating diseases such as their application in prevention and treatment of diabetes. In this opinion-based mini-review article, we aimed to investigate the DNA and RNA-based hybrid molecules specifically aptamers and had a logical conclusion as a promising future perspective in early diagnosis and treatment of diabetes.
Publisher: American Chemical Society (ACS)
Date: 25-04-2023
Publisher: American Chemical Society (ACS)
Date: 10-06-2021
Abstract: Hybrid bioactive inorganic-organic carbon-based nanocomposites of reduced graphene oxide (rGO) nanosheets enlarged with multi-walled carbon nanotubes (MWCNTs) were decorated to provide a suitable space for
Publisher: Springer Science and Business Media LLC
Date: 18-08-2021
DOI: 10.1007/S40820-021-00697-1
Abstract: Efficient strategies to promote microvascularization in vascular tissue engineering, a central priority in regenerative medicine, are still scarce nano- and micro-sized aggregates and spheres or beads harboring primitive microvascular beds are promising methods in vascular tissue engineering. Capillaries are the smallest type and in numerous blood vessels, which are distributed densely in cardiovascular system. To mimic this microvascular network, specific cell components and proangiogenic factors are required. Herein, advanced biofabrication methods in microvascular engineering, including extrusion-based and droplet-based bioprinting, Kenzan, and biogripper approaches, are deliberated with emphasis on the newest works in prevascular nano- and micro-sized aggregates and microspheres/microbeads.
Publisher: Springer Science and Business Media LLC
Date: 07-01-2023
Publisher: Springer Science and Business Media LLC
Date: 16-12-2020
DOI: 10.1038/S41586-020-03043-4
Abstract: The safe, highly effective measles vaccine has been recommended globally since 1974, yet in 2017 there were more than 17 million cases of measles and 83,400 deaths in children under 5 years old, and more than 99% of both occurred in low- and middle-income countries (LMICs) 1–4 . Globally comparable, annual, local estimates of routine first-dose measles-containing vaccine (MCV1) coverage are critical for understanding geographically precise immunity patterns, progress towards the targets of the Global Vaccine Action Plan (GVAP), and high-risk areas amid disruptions to vaccination programmes caused by coronavirus disease 2019 (COVID-19) 5–8 . Here we generated annual estimates of routine childhood MCV1 coverage at 5 × 5-km 2 pixel and second administrative levels from 2000 to 2019 in 101 LMICs, quantified geographical inequality and assessed vaccination status by geographical remoteness. After widespread MCV1 gains from 2000 to 2010, coverage regressed in more than half of the districts between 2010 and 2019, leaving many LMICs far from the GVAP goal of 80% coverage in all districts by 2019. MCV1 coverage was lower in rural than in urban locations, although a larger proportion of unvaccinated children overall lived in urban locations strategies to provide essential vaccination services should address both geographical contexts. These results provide a tool for decision-makers to strengthen routine MCV1 immunization programmes and provide equitable disease protection for all children.
Publisher: SAGE Publications
Date: 08-04-2019
Publisher: Elsevier BV
Date: 09-2021
Publisher: Springer Science and Business Media LLC
Date: 26-11-2020
DOI: 10.1038/S41598-020-77809-1
Abstract: Evaluation of the effect of different parameters for designing a non-viral vector in gene delivery systems has great importance. In this manner, 2D crystals, precisely layered double hydroxides, have attracted the attention of scientists due to their significant adjustability and low-toxicity and low-cost preparation procedure. In this work, the relationship between different physicochemical properties of LDH, including pH, size, zeta potential, and synthesis procedure, was investigated and optimized for CRISPR/Cas9 delivery and reverse fluorescence response to the EGFP. In this manner, ZnAl LDH and ZnAl HMTA LDH were synthesized and characterized and applied in the HEK-293 cell line to deliver CRISPR/Cas9. The results were optimized by different characterizations as well as Gel Electrophoresis and showed acceptable binding ability with the DNA that could be considered as a promising and also new gold-standard for the delivery of CRISPR/Cas9. Also, the relationship of the presence of tertiary amines (in this case, hexamethylenetetramine (HMTA) as the templates) in the structure of the ZnAl LDH, as well as the gene delivery application, was evaluated. The results showed more than 79% of relative cell viability in most of the weight ratios of LDH to CRISPR/Cas9 fully quenching the fluorescence intensity of the EGFP/LDH in the presence of 15 µg mL −1 of the protoporphyrins along with the detection limit of below 2.1 µg mL −1 , the transfection efficiency of around 33% of the GFP positive cell for ZnAl LDH and more than 38% for the ZnAl LDH in the presence of its tertiary amine template.
Publisher: American Chemical Society (ACS)
Date: 12-01-2022
Publisher: Wiley
Date: 13-09-2022
DOI: 10.1002/BTM2.10325
Abstract: Green chemistry has been a growing multidisciplinary field in recent years showing great promise in biomedical applications, especially for cancer therapy. Chitosan (CS) is an abundant biopolymer derived from chitin and is present in insects and fungi. This polysaccharide has favorable characteristics, including biocompatibility, biodegradability, and ease of modification by enzymes and chemicals. CS‐based nanoparticles (CS‐NPs) have shown potential in the treatment of cancer and other diseases, affording targeted delivery and overcoming drug resistance. The current review emphasizes on the application of CS‐NPs for the delivery of a chemotherapeutic agent, doxorubicin (DOX), in cancer therapy as they promote internalization of DOX in cancer cells and prevent the activity of P‐glycoprotein (P‐gp) to reverse drug resistance. These nanoarchitectures can provide co‐delivery of DOX with antitumor agents such as curcumin and cisplatin to induce synergistic cancer therapy. Furthermore, co‐loading of DOX with siRNA, shRNA, and miRNA can suppress tumor progression and provide chemosensitivity. Various nanostructures, including lipid‐, carbon‐, polymeric‐ and metal‐based nanoparticles, are modifiable with CS for DOX delivery, while functionalization of CS‐NPs with ligands such as hyaluronic acid promotes selectivity toward tumor cells and prevents DOX resistance. The CS‐NPs demonstrate high encapsulation efficiency and due to protonation of amine groups of CS, pH‐sensitive release of DOX can occur. Furthermore, redox‐ and light‐responsive CS‐NPs have been prepared for DOX delivery in cancer treatment. Leveraging these characteristics and in view of the biocompatibility of CS‐NPs, we expect to soon see significant progress towards clinical translation.
Publisher: Elsevier BV
Date: 02-2019
DOI: 10.1016/J.ATHEROSCLEROSIS.2018.11.040
Abstract: A large number of epidemiological studies in ethnically erse populations show that lipoprotein(a) [Lp(a)] levels above 30-50 mg/dL are significantly associated with calcific aortic valve stenosis, although less so in African Americans. Patients with heterozygous familial hypercholesterolemia (he-FH) have a marked lifelong elevation of serum low-density lipoprotein cholesterol (LDL-C) level, and the prevalence of aortic valve calcification (AVC) is at least two-fold higher among adult he-FH patients compared with healthy controls. Additionally, Lp(a) levels above 50 mg/dL were recently found to be an independent risk factor for AVC among asymptomatic statin-treated he-FH patients. Given that worldwide an estimated 1.4 billion people have an Lp(a) level over 50 mg/dL, and that one out of 250 in iduals has he-FH, then globally about 5 million he-FH patients should have an Lp(a) level higher than 50 mg/dL. However, because Lp(a) levels are, on average, significantly higher in he-FH patients than the general population, the actual number of he-FH patients with such high Lp(a) levels must be even higher. We proposed recently that Lp(a) life-years is a useful metric of cumulative burden of risk for atherosclerotic cardiovascular disease (ASCVD), and now posit that this metric may be extended to the development of AVC. The Lp(a) life-years illustrates the age-dependent exposure to a given Lp(a) level (years x mg/dL). Effective novel pharmacotherapies using apo(a) antisense oligonucleotides (ASOs) or small interfering RNA (siRNA)-based therapies targeting the hepatic expression of apo(a) offer unprecedented potential for significant reduction in the cumulative exposure of the aortic valves to Lp(a), and need to be tested in controlled clinical trials on the progression of AVC.
Publisher: Springer Science and Business Media LLC
Date: 07-2019
Publisher: Informa UK Limited
Date: 06-2020
DOI: 10.2147/IJN.S245936
Publisher: Wiley
Date: 19-05-2022
DOI: 10.1002/JBM.B.35087
Abstract: In this study, polyvinyl alcohol hydrogel chains were crosslinked by polyurethane in order to synthesize a suitable substrate for cartilage lesions. The substrate was fully characterized, and in vitro and in vivo investigations were conducted based on a sheep model. In vitro tests were performed based on the chondrocyte cells with the Alcian Blue and safranin O staining in order to prove the presence of proteoglycan on the surface of the synthesized substrate, which has been secreted by cultures of chondrocytes. Furthermore, the expression of collagen type I, collagen type II, aggrecan, and Sox9 was presented in the chondrocyte cultures on the synthesized substrate through RT‐PCR. In addition, the H& E analysis and other related tests demonstrated the formation of neocartilage tissue in a sheep model. The results were found to be promising for cartilage tissue engineering and verified that the isolated chondrocyte cultures on the synthesized substrate retain their original composition.
Publisher: Maad Rayan Publishing Company
Date: 07-2021
DOI: 10.34172/AIM.2021.74
Abstract: Background: Transport-related injuries (TIs) are a substantial public health concern for all regions of the world. The present study quantified the burden of TIs and deaths in the Eastern Mediterranean region (EMR) in 2017 by sex and age. Methods: TIs and deaths were estimated by age, sex, country, and year using Cause of Death Ensemble modelling (CODEm) and DisMod-MR 2.1. Disability-adjusted life years (DALYs), which quantify the total burden of years lost due to premature death or disability, were also estimated per 100000 population. All estimates were reported along with their corresponding 95% uncertainty intervals (UIs). Results: In 2017, there were 5.5 million (UI 4.9–6.2) transport-related incident cases in the EMR – a substantial increase from 1990 (2.8 million UI 2.5–3.1). The age-standardized incidence rate for the EMR in 2017 was 787 (UI 705.5–876.2) per 100000, which has not changed significantly since 1990 (-0.9% UI -4.7 to 3). These rates differed remarkably between countries, such that Oman (1303.9 UI 1167.3–1441.5) and Palestine (486.5 UI 434.5-545.9) had the highest and lowest age-standardized incidence rates per 100000, respectively. In 2017, there were 185.3 thousand (UI 170.8–200.6) transport-related fatalities in the EMR – a substantial increase since 1990 (140.4 thousand UI 118.7–156.9). The age-standardized death rate for the EMR in 2017 was 29.5 (UI 27.1–31.9) per 100000, which was 30.5% lower than that found in 1990 (42.5 UI 36.8–47.3). In 2017, Somalia (54 UI 30–77.4) and Lebanon (7.1 UI 4.8–8.6) had the highest and lowest age-standardized death rates per 100,000, respectively. The age-standardised DALY rate for the EMR in 2017 was 1,528.8 (UI 1412.5–1651.3) per 100000, which was 34.4% lower than that found in 1990 (2,331.3 UI 1,993.1–2,589.9). In 2017, the highest DALY rate was found in Pakistan (3454121 UI 2297890- 4342908) and the lowest was found in Bahrain (8616 UI 7670-9751). Conclusion: The present study shows that while road traffic has become relatively safer (measured by deaths and DALYs per 100000 population), the number of transport-related fatalities in the EMR is growing and needs to be addressed urgently.
Publisher: American Chemical Society (ACS)
Date: 09-01-2023
Publisher: Elsevier BV
Date: 09-2023
Publisher: Elsevier BV
Date: 11-2022
Publisher: Future Medicine Ltd
Date: 02-2021
Abstract: With significant advancements in research technologies, and an increasing global population, microfluidic and nanofluidic systems (such as point-of-care, lab-on-a-chip, organ-on-a-chip, etc) have started to revolutionize medicine. Devices that combine micron and nanotechnologies have increased sensitivity, precision and versatility for numerous medical applications. However, while there has been extensive research on microfluidic and nanofluidic systems, very few have experienced wide-spread commercialization which is puzzling and deserves our collective attention. For the above reasons, in this article, we review research advances that combine micro and nanotechnologies to create the next generation of nanomaterial-based microfluidic systems, the latest in their commercialization success and failure and highlight the value of these devices both in industry and in the laboratory.
Publisher: Royal Society of Chemistry (RSC)
Date: 2023
DOI: 10.1039/D3TB01805A
Publisher: Elsevier BV
Date: 06-2015
Publisher: American Chemical Society (ACS)
Date: 08-05-2021
Abstract: A one-pot and facile method with assistance of high gravity was applied for the synthesis of inorganic two-dimensional MOF-5 embedded MXene nanostructures. The innovative inorganic MXene/MOF-5 nanostructure was applied in co-delivery of drug and gene, and to increase its bioavailability and interaction with the pCRISPR, the nanomaterial was coated with alginate and chitosan. The polymer-coated nanosystems were fully characterized, and the sustained DOX delivery and comprehensive cytotoxicity studies were conducted on the HEK-293, PC12, HepG2, and HeLa cell lines, demonstrating acceptable and excellent cell viability at both very low (0.1 μg.mL
Publisher: American Medical Association (AMA)
Date: 12-2019
Publisher: Ivyspring International Publisher
Date: 2023
DOI: 10.7150/THNO.85419
Publisher: Bentham Science Publishers Ltd.
Date: 11-06-2019
DOI: 10.2174/1573399814666181031154817
Abstract: Substantial terms have been recognized on the associated risk elements, comorbidities as well as, putative pathophysiological processes of Alzheimer disease and related dementias (ADRDs) as well as, type 2 diabetes mellitus (T2DM), a few from greatest important disease from the moments. Very much is considered regarding the biology and chemistry of each predicament, nevertheless T2DM and ADRDs are an actually similar pattern developing from the similar origins of maturing or synergistic conditions connected by aggressive patho-corporeal terms and continues to be ambiguous. In this depth-critique article, we aimed to investigate all possibilities and represented a novel and applicable approach from the Medicinal Chemistry concepts.
Publisher: Elsevier BV
Date: 11-2022
Publisher: Informa UK Limited
Date: 10-2021
DOI: 10.2147/IJN.S338281
Publisher: Elsevier BV
Date: 09-2020
Publisher: American Chemical Society (ACS)
Date: 14-02-2023
Publisher: Royal Society of Chemistry (RSC)
Date: 2021
DOI: 10.1039/D0GC02719G
Abstract: A self-healing wound dressing hydrogel is prepared through Schiff-base cross-linking between oxidized salep (OSa) and ethylene diamine-modified salep (SaHEA) as first network and physical cross-linking of PVA via freezing-thawing as the second network.
Publisher: Springer Science and Business Media LLC
Date: 31-05-2022
DOI: 10.1007/S11356-022-21176-Z
Abstract: Two carbon composite materials were prepared by mixing avocado biochar and methyl polysiloxane (MK). Firstly, MK was dissolved in ethanol, and then the biochar was added at different times. In s le 1 (R1), the time of adding biochar was immediately after dissolving MK in ethanol, and in s le 2 (R
Publisher: Elsevier BV
Date: 11-2020
Publisher: Wiley
Date: 21-06-2022
DOI: 10.1002/BTM2.10347
Abstract: A proper self‐regenerating capability is lacking in human cardiac tissue which along with the alarming rate of deaths associated with cardiovascular disorders makes tissue engineering critical. Novel approaches are now being investigated in order to speedily overcome the challenges in this path. Tissue engineering has been revolutionized by the advent of nanomaterials, and later by the application of carbon‐based nanomaterials because of their exceptional variable functionality, conductivity, and mechanical properties. Electrically conductive biomaterials used as cell bearers provide the tissue with an appropriate microenvironment for the specific seeded cells as substrates for the sake of protecting cells in biological media against attacking mechanisms. Nevertheless, their advantages and shortcoming in view of cellular behavior, toxicity, and targeted delivery depend on the tissue in which they are implanted or being used as a scaffold. This review seeks to address, summarize, classify, conceptualize, and discuss the use of carbon‐based nanoparticles in cardiac tissue engineering emphasizing their conductivity. We considered electrical conductivity as a key affecting the regeneration of cells. Correspondingly, we reviewed conductive polymers used in tissue engineering and specifically in cardiac repair as key biomaterials with high efficiency. We comprehensively classified and discussed the advantages of using conductive biomaterials in cardiac tissue engineering. An overall review of the open literature on electroactive substrates including carbon‐based biomaterials over the last decade was provided, tabulated, and thoroughly discussed. The most commonly used conductive substrates comprising graphene, graphene oxide, carbon nanotubes, and carbon nanofibers in cardiac repair were studied.
Publisher: Elsevier BV
Date: 12-2022
Publisher: Elsevier BV
Date: 06-2019
Publisher: Wiley
Date: 28-06-2022
DOI: 10.1002/BTM2.10343
Abstract: MicroRNAs (miRNAs) as therapeutic agents have attracted increasing interest in the past decade owing to their significant effectiveness in treating a wide array of ailments. These polymerases II‐derived noncoding RNAs act through post‐transcriptional controlling of different proteins and their allied pathways. Like other areas of medicine, researchers have utilized miRNAs for managing acute and chronic wounds. The increase in the number of patients suffering from either under‐healing or over‐healing wound demonstrates the limited efficacy of the current wound healing strategies and dictates the demands for simpler approaches with greater efficacy. Various miRNA can be designed to induce pathway beneficial for wound healing. However, the proper design of miRNA and its delivery system for wound healing applications are still challenging due to their limited stability and intracellular delivery. Therefore, new miRNAs are required to be identified and their delivery strategy needs to be optimized. In this review, we discuss the erse roles of miRNAs in various stages of wound healing and provide an insight on the most recent findings in the nanotechnology and biomaterials field, which might offer opportunities for the development of new strategies for this chronic condition. We also highlight the advances in biomaterials and delivery systems, emphasizing their challenges and resolutions for miRNA‐based wound healing. We further review various biovectors (e.g., adenovirus and lentivirus) and abiotic materials such as organic and inorganic nanomaterials, along with dendrimers and scaffolds, as the delivery systems for miRNA‐based wound healing. Finally, challenges and opportunities for translation of miRNA‐based strategies into clinical applications are discussed.
Publisher: Springer Science and Business Media LLC
Date: 27-04-2023
Publisher: American Chemical Society (ACS)
Date: 24-02-2022
Publisher: Springer Science and Business Media LLC
Date: 21-06-2023
Publisher: Elsevier BV
Date: 12-2022
Publisher: Springer Science and Business Media LLC
Date: 03-07-2023
Publisher: MDPI AG
Date: 20-07-2020
DOI: 10.3390/IJMS21145126
Abstract: Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) caused the COVID-19 pandemic that has been spreading around the world since December 2019. More than 10 million affected cases and more than half a million deaths have been reported so far, while no vaccine is yet available as a treatment. Considering the global healthcare urgency, several techniques, including whole genome sequencing and computed tomography imaging have been employed for diagnosing infected people. Considerable efforts are also directed at detecting and preventing different modes of community transmission. Among them is the rapid detection of virus presence on different surfaces with which people may come in contact. Detection based on non-contact optical techniques is very helpful in managing the spread of the virus, and to aid in the disinfection of surfaces. Nanomaterial-based methods are proven suitable for rapid detection. Given the immense need for science led innovative solutions, this manuscript critically reviews recent literature to specifically illustrate nano-engineered effective and rapid solutions. In addition, all the different techniques are critically analyzed, compared, and contrasted to identify the most promising methods. Moreover, promising research ideas for high accuracy of detection in trace concentrations, via color change and light-sensitive nanostructures, to assist fingerprint techniques (to identify the virus at the contact surface of the gas and solid phase) are also presented.
Publisher: IOP Publishing
Date: 2018
Publisher: Elsevier BV
Date: 10-2022
DOI: 10.1016/J.CIS.2022.102771
Abstract: Tissue engineering and regenerative medicine have solved numerous problems related to the repair and regeneration of damaged organs and tissues arising from aging, illnesses, and injuries. Nanotechnology has further aided tissue regeneration science and has provided outstanding opportunities to help disease diagnosis as well as treat damaged tissues. Based on the most recent findings, magnetic nanostructures (MNSs), in particular, have emerged as promising materials for detecting, directing, and supporting tissue regeneration. There have been many reports concerning the role of these nano-building blocks in the regeneration of both soft and hard tissues, but the subject has not been extensively reviewed. Here, we review, classify, and discuss various synthesis strategies for novel MNSs used in medicine. Advanced applications of magnetic nanocomposites (MG-NCs), specifically magnetic nanostructures, are further systematically reviewed. In addition, the scientific and technical aspects of MG-NC used in medicine are discussed considering the requirements for the field. In summary, this review highlights the numerous opportunities and challenges associated with the use of MG-NCs as smart nanocomposites (NCs) in tissue engineering and regenerative medicine.
Publisher: BMJ
Date: 18-12-2019
DOI: 10.1136/INJURYPREV-2019-043299
Abstract: Past research has shown how fires, heat and hot substances are important causes of health loss globally. Detailed estimates of the morbidity and mortality from these injuries could help drive preventative measures and improved access to care. We used the Global Burden of Disease 2017 framework to produce three main results. First, we produced results on incidence, prevalence, years lived with disability, deaths, years of life lost and disability-adjusted life years from 1990 to 2017 for 195 countries and territories. Second, we analysed these results to measure mortality-to-incidence ratios by location. Third, we reported the measures above in terms of the cause of fire, heat and hot substances and the types of bodily injuries that result. Globally, there were 8 991 468 (7 481 218 to 10 740 897) new fire, heat and hot substance injuries in 2017 with 120 632 (101 630 to 129 383) deaths. At the global level, the age-standardised mortality caused by fire, heat and hot substances significantly declined from 1990 to 2017, but regionally there was variability in age-standardised incidence with some regions experiencing an increase (eg, Southern Latin America) and others experiencing a significant decrease (eg, High-income North America). The incidence and mortality of injuries that result from fire, heat and hot substances affect every region of the world but are most concentrated in middle and lower income areas. More resources should be invested in measuring these injuries as well as in improving infrastructure, advancing safety measures and ensuring access to care.
Publisher: BMJ
Date: 08-01-2020
DOI: 10.1136/INJURYPREV-2019-043297
Abstract: The Global Burden of Disease Study (GBD) has historically produced estimates of causes of injury such as falls but not the resulting types of injuries that occur. The objective of this study was to estimate the global incidence, prevalence and years lived with disability (YLDs) due to facial fractures and to estimate the leading injurious causes of facial fracture. We obtained results from GBD 2017. First, the study estimated the incidence from each injury cause (eg, falls), and then the proportion of each cause that would result in facial fracture being the most disabling injury. Incidence, prevalence and YLDs of facial fractures are then calculated across causes. Globally, in 2017, there were 7 538 663 (95% uncertainty interval 6 116 489 to 9 493 113) new cases, 1 819 732 (1 609 419 to 2 091 618) prevalent cases, and 117 402 (73 266 to 169 689) YLDs due to facial fractures. In terms of age-standardised incidence, prevalence and YLDs, the global rates were 98 (80 to 123) per 100 000, 23 (20 to 27) per 100 000, and 2 (1 to 2) per 100 000, respectively. Facial fractures were most concentrated in Central Europe. Falls were the predominant cause in most regions. Facial fractures are predominantly caused by falls and occur worldwide. Healthcare systems and public health agencies should investigate methods of all injury prevention. It is important for healthcare systems in every part of the world to ensure access to treatment resources.
Publisher: Elsevier BV
Date: 10-2020
Publisher: Springer Science and Business Media LLC
Date: 06-08-2021
Publisher: Elsevier BV
Date: 2024
Publisher: Springer Science and Business Media LLC
Date: 06-07-2023
Publisher: Wiley
Date: 15-11-2022
DOI: 10.1002/JGM.3458
Abstract: The overall success in launching discovered drugs is tightly restricted to the high rate of late‐stage failures, which ultimately inhibits the distribution of medicines in markets. As a result, it is imperative that methods reliably predict the effectiveness and, more critically, the toxicity of medicine early in the drug development process before clinical trials be continuously innovated. We must stay up to date with the fast appearance of new infections and diseases by rapidly developing the requisite vaccinations and medicines. Modern in vitro models of disease may be used as an alternative to traditional disease models, and advanced technology can be used for the creation of pharmaceuticals as well as cells, drugs, and gene delivery systems to expedite the drug discovery procedure. Furthermore, in vitro models that mimic the spatial and chemical characteristics of native tissues, such as a 3D bioprinting system or other technologies, have proven to be more effective for drug screening than traditional 2D models. Viral and non‐viral gene delivery vectors are a hopeful tool for combinatorial gene therapy, suggesting a quick way of simultaneously deliver multiple genes. A 3D bioprinting system embraces an excellent potential for gene delivery into the different cells or tissues for different diseases, in tissue engineering and regeneration medicine, in which the precise nucleic acid is located in the 3D printed tissues and scaffolds. Non‐viral nanocarriers, in combination with 3D printed scaffolds, are applied to their delivery of genes and controlled release properties. There remains, however, a big obstacle in reaching the full potential of 3D models because of a lack of in vitro manufacturing of live tissues. Bioprinting advancements have made it possible to create biomimetic constructions that may be used in various drug discovery research applications. 3D bioprinting also benefits vaccinations, medicines, and relevant delivery methods because of its flexibility and adaptability. This review discusses the potential of 3D bioprinting technologies for pharmaceutical studies.
Publisher: Walter de Gruyter GmbH
Date: 13-12-2018
Abstract: Organotin(IV) compounds have been considered for their outstanding industrial, medical and specific applications in the synthesis of various types of chemical compounds. In this review, we have focused on the structural chemistry of organotin(IV) compounds, including coordination chemistry, the effect of structure on reactions, bond formations from the perspective of structure and investigation of the structure of organotin(IV) compounds in different phases. The structural chemistry of organotin(IV) compounds is subject to interest due to their major impact on predicting the properties and drumming up support for pushing back the frontiers of synthesis of organotin(IV) compounds with advanced properties.
Publisher: IOP Publishing
Date: 04-08-2020
Publisher: Elsevier BV
Date: 11-2023
Publisher: Elsevier BV
Date: 03-2023
Publisher: Elsevier BV
Date: 02-2020
Publisher: Elsevier BV
Date: 10-2020
Publisher: Informa UK Limited
Date: 03-2021
DOI: 10.2147/IJN.S299448
Publisher: Wiley
Date: 22-09-2022
DOI: 10.1111/CBDD.14136
Abstract: Application of materials capable of energy harvesting to increase the efficiency and environmental adaptability is sometimes reflected in the ability of discovery of some traces in an environment―either experimentally or computationally―to enlarge practical application window. The emergence of computational methods, particularly computer‐aided drug discovery (CADD), provides le opportunities for the rapid discovery and development of unprecedented drugs. The expensive and time‐consuming process of traditional drug discovery is no longer feasible, for nowadays the identification of potential drug candidates is much easier for therapeutic targets through elaborate in silico approaches, allowing the prediction of the toxicity of drugs, such as drug repositioning (DR) and chemical genomics (chemogenomics). Coronaviruses (CoVs) are cross‐species viruses that are able to spread expeditiously from the into new host species, which in turn cause epidemic diseases. In this sense, this review furnishes an outline of computational strategies and their applications in drug discovery. A special focus is placed on chemogenomics and DR as unique and emerging system‐based disciplines on CoV drug and target discovery to model protein networks against a library of compounds. Furthermore, to demonstrate the special advantages of CADD methods in rapidly finding a drug for this deadly virus, numerous ex les of the recent achievements grounded on molecular docking, chemogenomics, and DR are reported, analyzed, and interpreted in detail. It is believed that the outcome of this review assists developers of energy harvesting materials and systems for detection of future unexpected kinds of CoVs or other variants.
Publisher: Informa UK Limited
Date: 06-2020
DOI: 10.2147/IJN.S252237
Publisher: Elsevier BV
Date: 2023
DOI: 10.1016/J.CHEMOSPHERE.2022.137191
Abstract: Nowadays, the evolution of two-dimensional materials like transition metal carbides (MXene) prepares a novel path to surpass the "trade-off" between the membrane permeation and rejection rates. Based on water swelling and oxidation vulnerability, MXene membranes showed vivid defects such as inadequate stability, detrimental adsorption, and haphazardly stacked nanosheets. Here, we prepared Ti
Publisher: Elsevier BV
Date: 11-2023
Publisher: Elsevier BV
Date: 12-2022
Publisher: Elsevier BV
Date: 06-2020
Publisher: Elsevier BV
Date: 10-2022
Publisher: Elsevier BV
Date: 11-2020
Publisher: Royal Society of Chemistry (RSC)
Date: 2022
DOI: 10.1039/D2EN00527A
Abstract: In this review article, key factors about the 2D MXene nanomaterials in electrochemical and biomedical applications have been reviewed and discussed.
Publisher: Elsevier BV
Date: 12-2019
Publisher: Wiley
Date: 22-03-2023
Abstract: Driven by regulatory authorities and the ever‐growing demands from industry, various artificial tissue models have been developed. Nevertheless, there is no model to date that is capable of mimicking the biomechanical properties of the skin whilst exhibiting the hydrophilicity/hydrophobicity properties of the skin layers. As a proof‐of‐concept study, tissue surrogates based on gel and silicone are fabricated for the evaluation of microneedle penetration, drug diffusion, photothermal activity, and ultrasound bioimaging. The silicone layer aims to imitate the stratum corneum while the gel layer aims to mimic the water‐rich viable epidermis and dermis present in in vivo tissues. The diffusion of drugs across the tissue model is assessed, and the results reveal that the proposed tissue model shows similar behavior to a cancerous kidney. In place of typical in vitro aqueous solutions, this model can also be employed for evaluating the photoactivity of photothermal agents since the tissue model shows a similar heating profile to skin of mice when irradiated with near‐infrared laser. In addition, the designed tissue model exhibits promising results for biomedical applications in optical coherence tomography and ultrasound imaging. Such a tissue model paves the way to reduce the use of animals testing in research whilst obviating ethical concerns.
Publisher: American Chemical Society (ACS)
Date: 08-11-2022
DOI: 10.1021/ACSBIOMATERIALS.2C00531
Abstract: Organ-on-a-chip (OOC) systems are engineered nanobiosystems to mimic the physiochemical environment of a specific organ in the body. Among various components of OOC systems, biomimetic membranes have been regarded as one of the most important key components to develop controllable biomimetic bioanalysis systems. Here, we review the preparation and characterization of biomimetic membranes in comparison with the features of the extracellular matrix. After that, we review and discuss the latest applications of engineered biomimetic membranes to fabricate various organs on a chip, such as liver, kidney, intestine, lung, skin, heart, vasculature and blood vessels, brain, and multiorgans with perspectives for further biomedical applications.
Publisher: Elsevier BV
Date: 08-2023
Publisher: Elsevier BV
Date: 06-2023
Publisher: American Chemical Society (ACS)
Date: 05-05-2023
Publisher: American Chemical Society (ACS)
Date: 04-12-2020
Publisher: American Chemical Society (ACS)
Date: 29-11-2021
Abstract: The design of advanced nanobiomaterials to improve analytical accuracy and therapeutic efficacy has become an important prerequisite for the development of innovative nanomedicines. Recently, phospholipid nanobiomaterials including 2-methacryloyloxyethyl phosphorylcholine (MPC) have attracted great attention with remarkable characteristics such as resistance to nonspecific protein adsorption and cell adhesion for various biomedical applications. Despite many recent reports, there is a lack of comprehensive review on the phospholipid nanobiomaterials from synthesis to diagnostic and therapeutic applications. Here, we review the synthesis and characterization of phospholipid nanobiomaterials focusing on MPC polymers and highlight their attractive potentials for applications in micro/nanofabricated fluidic devices, biosensors, lab-on-a-chip, drug delivery systems (DDSs), COVID-19 potential usages for early diagnosis and even treatment, and artificial extracellular matrix scaffolds for cellular engineering.
Publisher: IOP Publishing
Date: 14-08-2020
Abstract: This study aims to investigate the synthesis of ZnO nanoparticles (NPs) using high-gravity technique and mediated by novel Allium ursinum leaves’ extract, which is derived for the first time. The synthesized NPs were fully characterized, and the potential biological activities were evaluated in the context of neuroscience. The size of the nanoparticles was found in range of 20 to 60 nm’s, with a considerable size distribution of 30 nm and their morphology are semi-spherical. More specifically the potential antibacterial activity against gram positive ( S. aureus ) and gram negative ( E. coli ) bacteria were screened. To the best of our knowledge, this study could be considered as the first investigation in the world, and the first comprehensive study on synthesizing ZnO NPs using high-gravity technique mediated by this plant extract. The experimental results were found to be very promising to the nano-chemistry, green chemistry and also the applied neuroscience. In addition, the mentioned green synthesis procedure leads to the formation of NPs with considerable antibacterial, cellular proliferation and mitochondrial membrane potential as well as minimum apoptosis index and acceptable relative cell viability that are all independent with the morphology and texture of the media of these NPs. The green synthesized nanoparticles showed considerable antioxidant activity in comparison with the standard drug, more than 80%, and low cytotoxicity, more than 60% cellular viability in most of the concentrations, as well as proliferation inhibition of up to 84% in the maximum concentration. Along with those results, the mitochondrial membrane potential showed also promising absorption of over 1.6. Furthermore, the antioxidant activity of the green synthesized ZnO NPs was recorded above 82% which is greater than the standard BHT as well as the leaf extract
Publisher: Institution of Engineering and Technology (IET)
Date: 05-07-2019
Publisher: Springer Science and Business Media LLC
Date: 09-08-2021
Publisher: Wiley
Date: 23-07-2021
Abstract: Excessive and unwarranted administration of antibiotics has invigorated the evolution of multidrug‐resistant microbes. There is, therefore, an urgent need for advanced active compounds. Ionic liquids with short‐lived ion‐pair structures are highly tunable and have erse applications. Apart from their unique physicochemical features, the newly discovered biological activities of ionic liquids have fascinated biochemists, microbiologists, and medical scientists. In particular, their antimicrobial properties have opened new vistas in overcoming the current challenges associated with combating antibiotic‐resistant pathogens. Discussions regarding ionic liquid derivatives in monomeric and polymeric forms with antimicrobial activities are presented here. The antimicrobial mechanism of ionic liquids and parameters that affect their antimicrobial activities, such as chain length, cation/anion type, cation density, and polymerization, are considered. The potential applications of ionic liquids in the biomedical arena, including regenerative medicine, biosensing, and drug/biomolecule delivery, are presented to stimulate the scientific community to further improve the antimicrobial efficacy of ionic liquids.
Publisher: Elsevier BV
Date: 05-2022
DOI: 10.1016/J.PRP.2022.153883
Abstract: Colorectal cancer (CRC) is one of the most common malignancies in the world and has a high mortality rate. It is believed that dysfunction in the expression of mucins and aberrant expression of some lncRNAs are associated with the occurrence and development of CRC. Therefore, the aim of the present study was to investigate the expression of MUC15, MUC16, MUC20, PCAT1, CCAT1 and HOTAIR genes in colorectal cancer and its relationship with clinicopathological variables. This research was prospective case-control study. Tumors from CRC patients were collected from the Taleghani Hospital, Shahid Beheshti University of Medical Sciences, Tehran, Iran. RNA extraction and cDNA synthesis were performed using the corresponding kits. The gene primer was designed and RT-PCR was used to evaluate gene expression. The t-test and ANOVA were employed to examine the differences between groups. Data analysis was performed using Prism8 software. The results of the present study showed that the expression of MUC15 (P = 0.0012), MUC20 (P = 0.009) and CCAT1 (P = 0.001) genes in patients with colorectal cancer were significantly different from tumor margin s les. There were also associations between the expression of the studied genes and clinicopathological variables such as grade and stage of colorectal cancer tumor as well as the age of the patients. The area under the curves (AUC) for the MUC15 0.953 (95% CI 7565-0.9897, P = 0.0003), MUC20 0.782 (95% CI 0.6163-0.9482, P = 0.008) and CCAT1 0.917 (95% CI 0.8015-1, P = 0.0003) were calculated by ROC analysis. The current experiment revealed changes in expression level of mucin genes and lncRNAs in CRC and its different stages, showing that they can be considered as biomarkers for diagnosis of this cancer.
Publisher: Informa UK Limited
Date: 04-2020
DOI: 10.2147/IJN.S248327
Publisher: Elsevier BV
Date: 08-2022
Publisher: American Scientific Publishers
Date: 05-2020
Abstract: Successful gene therapy depends on the design of effective gene delivery systems. A gene delivery system is considered a powerful tool for the release of genetic material within cells resulting in a change in cell functions and protein production. The release of genes in a controlled manner by using appropriate carriers facilitates their release without side effects and increases the expression of genes at the released site. It is expected that significant changes in the combination of several genes and drugs can be provided by developing treatment systems sensitive to different stimuli such as redox potential, pH variations, temperature gradients, light irradiation, and enzyme activity. The most important advantages for the release of genes and stimuli-responsive therapeutics include delivering vectors locally, reducing side effects and causing no toxicity to distant tissues while at the same time reducing the immune response to the vectors. In this review, we aim to discuss different types of gene carriers involved in the controlled transfer of nucleic acids (non-viral inorganic and organic nanoparticles (NPs) and virus-like particles (VLPs)) as well as the simultaneous transfer of several genes and/or drugs into cells or different tissues, providing for an efficient and safe treatment of numerous diseases.
Publisher: Wiley
Date: 17-06-2022
DOI: 10.1002/BTM2.10353
Abstract: Urological cancers are among the most common malignancies around the world. In particular, bladder cancer severely threatens human health due to its aggressive and heterogeneous nature. Various therapeutic modalities have been considered for the treatment of bladder cancer although its prognosis remains unfavorable. It is perceived that treatment of bladder cancer depends on an interdisciplinary approach combining biology and engineering. The nanotechnological approaches have been introduced in the treatment of various cancers, especially bladder cancer. The current review aims to emphasize and highlight possible applications of nanomedicine in eradication of bladder tumor. Nanoparticles can improve efficacy of drugs in bladder cancer therapy through elevating their bioavailability. The potential of genetic tools such as siRNA and miRNA in gene expression regulation can be boosted using nanostructures by facilitating their internalization and accumulation at tumor sites and cells. Nanoparticles can provide photodynamic and photothermal therapy for ROS overgeneration and hyperthermia, respectively, in the suppression of bladder cancer. Furthermore, remodeling of tumor microenvironment and infiltration of immune cells for the purpose of immunotherapy are achieved through cargo‐loaded nanocarriers. Nanocarriers are mainly internalized in bladder tumor cells by endocytosis, and proper design of smart nanoparticles such as pH‐, redox‐, and light‐responsive nanocarriers is of importance for targeted tumor therapy. Bladder cancer biomarkers can be detected using nanoparticles for timely diagnosis of patients. Based on their accumulation at the tumor site, they can be employed for tumor imaging. The clinical translation and challenges are also covered in current review.
Publisher: Informa UK Limited
Date: 03-2021
DOI: 10.2147/IJN.S298699
Publisher: Springer Science and Business Media LLC
Date: 13-04-2023
Publisher: Elsevier BV
Date: 03-2020
Publisher: Wiley
Date: 13-07-2020
DOI: 10.1002/POL.20200295
Publisher: Elsevier BV
Date: 12-2019
Publisher: Elsevier BV
Date: 11-2020
Publisher: BMJ
Date: 20-02-2020
DOI: 10.1136/INJURYPREV-2019-043484
Abstract: Drowning is a leading cause of injury-related mortality globally. Unintentional drowning (International Classification of Diseases (ICD) 10 codes W65-74 and ICD9 E910) is one of the 30 mutually exclusive and collectively exhaustive causes of injury-related mortality in the Global Burden of Disease (GBD) study. This study’s objective is to describe unintentional drowning using GBD estimates from 1990 to 2017. Unintentional drowning from GBD 2017 was estimated for cause-specific mortality and years of life lost (YLLs), age, sex, country, region, Socio-demographic Index (SDI) quintile, and trends from 1990 to 2017. GBD 2017 used standard GBD methods for estimating mortality from drowning. Globally, unintentional drowning mortality decreased by 44.5% between 1990 and 2017, from 531 956 (uncertainty interval (UI): 484 107 to 572 854) to 295 210 (284 493 to 306 187) deaths. Global age-standardised mortality rates decreased 57.4%, from 9.3 (8.5 to 10.0) in 1990 to 4.0 (3.8 to 4.1) per 100 000 per annum in 2017. Unintentional drowning-associated mortality was generally higher in children, males and in low-SDI to middle-SDI countries. China, India, Pakistan and Bangladesh accounted for 51.2% of all drowning deaths in 2017. Oceania was the region with the highest rate of age-standardised YLLs in 2017, with 45 434 (40 850 to 50 539) YLLs per 100 000 across both sexes. There has been a decline in global drowning rates. This study shows that the decline was not consistent across countries. The results reinforce the need for continued and improved policy, prevention and research efforts, with a focus on low- and middle-income countries.
Publisher: Elsevier BV
Date: 11-2022
Publisher: Elsevier BV
Date: 07-2018
Publisher: American Chemical Society (ACS)
Date: 04-04-2022
Abstract: Dopamine is one of the most important neurotransmitters released by neurons in the central nervous system, and a variety of neurological illnesses and mental disorders are associated with impairments in the secretion and functionality of dopamine. Dopamine, depending on the type of receptors, can act as a stimulant or an inhibitor. In this study, dendrimer-conjugated dopamine was utilized as a chelating agent for Technetium-99m to investigate the organ distribution of this compound
Publisher: Wiley
Date: 07-2022
DOI: 10.1002/PEN.26057
Abstract: Silk fibroin (SF) has been broadly applied in wound dressing fabrication because of its proper features for wound healing. In this work, we developed a carboxymethyl cellulose (CMC)/gelatin blend film with different concentrations of glycerol, and modified the optimized film with an SF layer through electrospinning process. Tensile strength and cell viability evaluation of blend films demonstrated that the glycerol content of 3% could be suitable as the substrate layer for the two‐layer wound dressing. The morphology of the blend film and electrospun nanofibers was obtained from scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). It concluded that structural changes had been occurred in both layers after cross‐linking with glutaraldehyde vapor. Further, it was shown that the mechanical properties of the two‐layer enhanced with the addition of SF. Moreover, the swelling ratio was higher than those of SF itself, due to the hydrophilic property of CMC/gelatin blend film. The biocompatibility of fibroblasts was investigated by MTT assay, and the coating showed an improvement in cell proliferation because of the cytocompatibility nature of SF. All results suggest that the prepared wound dressing could be a desirable candidate for wound healing applications.
Publisher: MDPI AG
Date: 17-01-2022
DOI: 10.3390/JCS6010029
Abstract: To answer the question “How does lanthanide doping in iron oxide affect cure kinetics of epoxy-based nanocomposites?”, we synthesized samarium (Sm)-doped Fe3O4 nanoparticles electrochemically and characterized it using Fourier-transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy dispersive X-Ray analysis (EDX), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy analyses (XPS). The magnetic particles were uniformly dispersed in epoxy resin to increase the curability of the epoxy/amine system. The effect of the lanthanide dopant on the curing reaction of epoxy with amine was explored by analyzing differential scanning calorimetry (DSC) experimental data based on a model-free methodology. It was found that Sm3+ in the structure of Fe3O4 crystal participates in cross-linking epoxy by catalyzing the reaction between epoxide rings and amine groups of curing agents. In addition, the etherification reaction of active OH groups on the surface of nanoparticles reacts with epoxy rings, which prolong the reaction time at the late stage of reaction where diffusion is the dominant mechanism.
Publisher: Springer Science and Business Media LLC
Date: 31-01-2023
Publisher: MDPI AG
Date: 04-11-2022
DOI: 10.3390/MOLECULES27217570
Abstract: This work proposes a facile methodology for producing porous biochar material (ABC) from açaí kernel residue, produced by chemical impregnation with ZnCl2 (1:1) and pyrolysis at 650.0 °C. The characterization was achieved using several techniques, and the biochar material was employed as an adsorbent to remove catechol. The results show that ABC carbon has hydrophilic properties. The specific surface area and total pore volume are 1315 m2·g−1 and 0.7038 cm3·g−1, respectively. FTIR revealed the presence of oxygenated groups, which can influence catechol adsorption. The TGA/DTG indicated that the s le is thermally stable even at 580 °C. Adsorption studies showed that equilibrium was achieved in min and the Avrami kinetic model best fits the experimental data, while Freundlich was observed to be the best-fitted isotherm model. Catechol adsorption on ABC biochar is governed by van der Waals forces and microporous and mesoporous filling mechanisms. The Qmax is 339.5 mg·g−1 (40 °C) with 98.36% removal of simulated effluent, showing that açaí kernel is excellent biomass to prepare good biochar that can be efficiently used to treat real industrial effluents.
Publisher: American Chemical Society (ACS)
Date: 23-02-2021
Publisher: Elsevier BV
Date: 08-2023
Publisher: MDPI AG
Date: 28-11-2021
DOI: 10.3390/MA14237277
Abstract: MOFs exhibit inherent extraordinary features for erse applications ranging from catalysis, storage, and optics to chemosensory and biomedical science and technology. Several procedures including solvothermal, hydrothermal, mechanochemical, electrochemical, and ultrasound techniques have been used to synthesize MOFs with tailored features. A continued attempt has also been directed towards functionalizing MOFs via “post-synthetic modification” mainly by changing linkers (by altering the type, length, functionality, and charge of the linkers) or node components within the MOF framework. Additionally, efforts are aimed towards manipulating the size and morphology of crystallite domains in the MOFs, which are aimed at enlarging their applications window. Today’s knowledge of artificial intelligence and machine learning has opened new pathways to elaborate multiple nanoporous complex MOFs and nano-MOFs (NMOFs) for advanced theranostic, clinical, imaging, and diagnostic purposes. Successful accumulation of a photosensitizer in cancerous cells was a significant step in cancer therapy. The application of MOFs as advanced materials and systems for cancer therapy is the main scope beyond this perspective. Some challenging aspects and promising features in MOF-based cancer diagnosis and cancer therapy have also been discussed.
Publisher: Elsevier BV
Date: 04-2022
Publisher: Elsevier BV
Date: 03-2022
Publisher: Wiley
Date: 02-08-2022
DOI: 10.1002/AOC.6825
Abstract: How does the cerium (Ce) doping in ferrimagnetic magnetite (Fe 3 O 4 ) affect the crosslinking state and kinetics of epoxy crosslinking with amine curing agents? To answer this question, we electrochemically synthesized nanoparticles of Ce–Fe 3 O 4 and characterized them by FTIR, XRD, FE‐SEM, EDX, TEM, and XPS analyses. The presence of Ce atoms in Fe 3 O 4 crystalline lattice increased the surface area and active hydroxyl sites of the prepared magnetic nanoparticles (MNPs) associated with partial shrinkage of molecular lattice. The MNPs uniformly dispersed in epoxy resin and unconditionally tagged epoxy nanocomposites as Excellent cured systems. The effect of lanthanide doping on the cure kinetics of epoxy with amine was explored applying nonisothermal DSC and model‐free kinetic approaches, signifying that Ce–Fe 3 O 4 nanoparticles facilitated epoxy ring opening by intensification of etherification reaction whatever the heating rate. Even at very low loading of Ce–Fe 3 O 4 nanoparticles into the epoxy (0.1 wt.%), the average apparent activation energy significantly decreased by ≈10%. This outcome would highlight the role of crosslinking on the ultimate properties, such as anticorrosive and/or self‐healing characteristics contributed by Ce‐doped nanoparticles once added to epoxy coating formulation.
Publisher: Springer Science and Business Media LLC
Date: 12-07-2023
Publisher: Elsevier BV
Date: 10-2022
Publisher: American Medical Association (AMA)
Date: 10-2023
Publisher: Elsevier BV
Date: 08-2022
DOI: 10.1016/J.DRUDIS.2022.05.012
Abstract: Long noncoding RNAs (lncRNAs) are RNA molecules involved in gene regulation at transcriptional, post-transcriptional, and epigenetic levels. lncRNAs participate in regulating apoptosis and autophagy in pancreatic cancer (PCa) and can promote and/or decrease the proliferation rate of tumor cells. The metastasis of PCa cells is tightly regulated by lncRNAs and they can affect the mechanism of epithelial-mesenchymal transition (EMT) to modulate metastasis. The drug resistance of PCa cells, especially to gemcitabine, can be affected by lncRNAs. In addition, lncRNAs enriched in exosomes can be transferred among tumor cells to regulate their proliferation and metastasis. Antitumor compounds, such as curcumin and ginsenosides, can regulate lncRNA expression in PCa therapy. As we discuss here, the expression level of lncRNAs can be considered as both a diagnostic and prognostic tool in patients with PCa.
Publisher: Springer Science and Business Media LLC
Date: 24-02-2023
DOI: 10.1186/S40779-023-00443-1
Abstract: Fungi and bacteria afflict humans with innumerous pathogen-related infections and ailments. Most of the commonly employed microbicidal agents target commensal and pathogenic microorganisms without discrimination. To distinguish and fight the pathogenic species out of the microflora, novel antimicrobials have been developed that selectively target specific bacteria and fungi. The cell wall features and antimicrobial mechanisms that these microorganisms involved in are highlighted in the present review. This is followed by reviewing the design of antimicrobials that selectively combat a specific community of microbes including Gram-positive and Gram-negative bacterial strains as well as fungi. Finally, recent advances in the antimicrobial immunomodulation strategy that enables treating microorganism infections with high specificity are reviewed. These basic tenets will enable the avid reader to design novel approaches and compounds for antibacterial and antifungal applications.
Publisher: Institution of Engineering and Technology (IET)
Date: 29-07-2019
Publisher: BMJ
Date: 13-03-2020
DOI: 10.1136/INJURYPREV-2019-043495
Abstract: As global rates of mortality decrease, rates of non-fatal injury have increased, particularly in low Socio-demographic Index (SDI) nations. We hypothesised this global pattern of non-fatal injury would be demonstrated in regard to bony hand and wrist trauma over the 27-year study period. The Global Burden of Diseases, Injuries, and Risk Factors Study 2017 was used to estimate prevalence, age-standardised incidence and years lived with disability for hand trauma in 195 countries from 1990 to 2017. In idual injuries included hand and wrist fractures, thumb utations and non-thumb digit utations. The global incidence of hand trauma has only modestly decreased since 1990. In 2017, the age-standardised incidence of hand and wrist fractures was 179 per 100 000 (95% uncertainty interval (UI) 146 to 217), whereas the less common injuries of thumb and non-thumb digit utation were 24 (95% UI 17 to 34) and 56 (95% UI 43 to 74) per 100 000, respectively. Rates of injury vary greatly by region, and improvements have not been equally distributed. The highest burden of hand trauma is currently reported in high SDI countries. However, low-middle and middle SDI countries have increasing rates of hand trauma by as much at 25%. Certain regions are noted to have high rates of hand trauma over the study period. Low-middle and middle SDI countries, however, have demonstrated increasing rates of fracture and utation over the last 27 years. This trend is concerning as access to quality and subspecialised surgical hand care is often limiting in these resource-limited regions.
Publisher: BMJ
Date: 24-04-2020
DOI: 10.1136/INJURYPREV-2019-043494
Abstract: Past research in population health trends has shown that injuries form a substantial burden of population health loss. Regular updates to injury burden assessments are critical. We report Global Burden of Disease (GBD) 2017 Study estimates on morbidity and mortality for all injuries. We reviewed results for injuries from the GBD 2017 study. GBD 2017 measured injury-specific mortality and years of life lost (YLLs) using the Cause of Death Ensemble model. To measure non-fatal injuries, GBD 2017 modelled injury-specific incidence and converted this to prevalence and years lived with disability (YLDs). YLLs and YLDs were summed to calculate disability-adjusted life years (DALYs). In 1990, there were 4 260 493 (4 085 700 to 4 396 138) injury deaths, which increased to 4 484 722 (4 332 010 to 4 585 554) deaths in 2017, while age-standardised mortality decreased from 1079 (1073 to 1086) to 738 (730 to 745) per 100 000. In 1990, there were 354 064 302 (95% uncertainty interval: 338 174 876 to 371 610 802) new cases of injury globally, which increased to 520 710 288 (493 430 247 to 547 988 635) new cases in 2017. During this time, age-standardised incidence decreased non-significantly from 6824 (6534 to 7147) to 6763 (6412 to 7118) per 100 000. Between 1990 and 2017, age-standardised DALYs decreased from 4947 (4655 to 5233) per 100 000 to 3267 (3058 to 3505). Injuries are an important cause of health loss globally, though mortality has declined between 1990 and 2017. Future research in injury burden should focus on prevention in high-burden populations, improving data collection and ensuring access to medical care.
Publisher: Elsevier BV
Date: 09-2019
Publisher: Knowledge E
Date: 25-12-2019
Abstract: Hydatidosis is a zoonotic disease caused by Echinococcus parasite that frequently involves liver and lungs. Primary intracranial hydatidosis is a rare condition which can be life threatening if ruptured. Here we report an unusual case of primary intracranial hydatid cyst without any other organ involvement, diagnosed in a 12-year-old boy in Emam Reza hospital, Birjand, Iran in November 2016, in order to focus on the importance of proper diagnosis and management, especially in endemic areas.
Publisher: Elsevier BV
Date: 11-2022
Publisher: Elsevier BV
Date: 08-2020
Publisher: American Chemical Society (ACS)
Date: 05-04-2022
Abstract: In the current study, the physicochemical and biological properties of tetracycline-loaded core-shell nanoparticles (Tet/Ni
Publisher: Elsevier BV
Date: 10-2020
Publisher: Frontiers Media SA
Date: 12-06-2023
Publisher: Elsevier BV
Date: 09-2023
Publisher: Elsevier BV
Date: 05-2022
DOI: 10.1016/J.CRITREVONC.2022.103680
Abstract: The macrophages are abundantly found in TME and their M2 polarization is in favor of tumor malignancy. On the other hand, non-coding RNAs (ncRNAs) can modulate macrophage polarization in TME to affect cancer progression. The miRNAs can dually induce/suppress M2 polarization of macrophages and by affecting various molecular pathways, they modulate tumor progression and therapy response. The lncRNAs can affect miRNAs via sponging and other molecular pathways to modulate macrophage polarization. A few experiments have also examined role of circRNAs in targeting signaling networks and affecting macrophages. The therapeutic targeting of these ncRNAs can mediate TME remodeling and affect macrophage polarization. Furthermore, exosomal ncRNAs derived from tumor cells or macrophages can modulate polarization and TME remodeling. Suppressing biogenesis and secretion of exosomes can inhibit ncRNA-mediated M2 polarization of macrophages and prevent tumor progression. The ncRNAs, especially exosomal ncRNAs can be considered as non-invasive biomarkers for tumor diagnosis.
Publisher: Elsevier BV
Date: 06-2021
Publisher: Springer Science and Business Media LLC
Date: 07-08-2018
Publisher: Elsevier BV
Date: 09-2023
Publisher: Royal Society of Chemistry (RSC)
Date: 2020
DOI: 10.1039/D0NJ02595J
Abstract: Here, the carboxamide ligand N -(thiazole-2-yl) picolinamide ( L ) was synthesized in an ionic liquid tetrabutylammonium bromide (TBAB) as the benign reaction medium.
Publisher: Elsevier BV
Date: 08-2022
Publisher: American Medical Association (AMA)
Date: 03-2022
Publisher: American Chemical Society (ACS)
Date: 17-12-2021
Publisher: Elsevier BV
Date: 10-2020
Publisher: Royal Society of Chemistry (RSC)
Date: 2021
DOI: 10.1039/D0NJ06310J
Abstract: The synthesis of (GaN) 1−x (ZnO) x with the assistance of high-gravity using a green approach for the first time, with the application of delivering pCRISPR.
Publisher: Elsevier BV
Date: 12-2023
Publisher: Elsevier BV
Date: 10-2020
Publisher: Informa UK Limited
Date: 06-2020
DOI: 10.2147/IJN.S255398
Publisher: Bentham Science Publishers Ltd.
Date: 08-07-2020
DOI: 10.2174/1573411014666180829111004
Abstract: Multiple Sclerosis (MS) involves an immune-mediated response in which body’s immune system destructs the protective sheath (myelin). Part of the known MS biomarkers are discovered in cerebrospinal fluid like oligoclonal lgG (OCGB), and also in blood like myelin Oligodendrocyte Glycoprotein (MOG). The conventional MS diagnostic methods often fail to detect the disease in early stages such as Clinically Isolated Syndrome (CIS), which considered as a concerning issue since CIS highlighted as a prognostic factor of MS development in most cases. MS diagnostic techniques include Magnetic Resonance Imaging (MRI) of the brain and spinal cord, lumbar puncture (or spinal tap) that evaluate cerebrospinal fluid, evoked potential testing revealing abnormalities in the brain and spinal cord. These conventional diagnostic methods have some negative points such as extensive processing time as well as restriction in the quantity of s les that can be analyzed concurrently. Scientists have focused on developing the detection methods especially early detection which belongs to ultra-sensitive, non-invasive and needed for the Point of Care (POC) diagnosis because the situation was complicated by false positive or negative results. As a result, biosensors are utilized and investigated since they could be ultra-sensitive to specific compounds, cost effective devices, body-friendly and easy to implement. In addition, it has been proved that the biosensors on physiological fluids (blood, serum, urine, saliva, milk etc.) have quick response in a non-invasive rout. In general form, a biosensor system for diagnosis and early detection process usually involves biomarker (target molecule), bio receptor (recognition element) and compatible bio transducer. Studies underlined that early treatment of patients with high possibility of MS can be advantageous by postponing further abnormalities on MRI and subsequent attacks. This Review highlights variable disease diagnosis approaches such as Surface Plasmon Resonance (SPR), electrochemical biosensors, Microarrays and microbeads based Microarrays, which are considered as promising methods for detection and early detection of MS.
Publisher: Elsevier BV
Date: 08-2023
Publisher: Informa UK Limited
Date: 2022
DOI: 10.2147/IJN.S335380
Publisher: Wiley
Date: 30-11-2020
Publisher: Elsevier BV
Date: 09-2022
Publisher: Springer Science and Business Media LLC
Date: 23-03-2021
DOI: 10.1038/S41598-021-86119-Z
Abstract: Herein, in a one-pot method, the reduced graphene oxide layers with the assistance of multiwalled carbon nanotubes were decorated to provide a suitable space for the in situ growth of CoNi 2 S 4 , and the porphyrins were incorporated into the layers as well to increase the sensitivity of the prepared nanostructure. The prepared nanocomposite can establish π–π interactions between the genetic material and on the surface of porphyrin rings. Also, hydrogen bonds between genetic domains and the porphyrin’ nitrogen and the surface hydroxyl groups are probable. Furthermore, the potential donor–acceptor relationship between the d 7 transition metal, cobalt, and the genetic material provides a suitable way to increase the interaction and gene loading , and transfections. The reason for this phenomenon was optimized to increase the EGFP by up to 17.9%. Furthermore, the sensing ability of the nanocomposite towards H 2 O 2 was investigated. In this regard, the limit of detection of the H 2 O 2 obtained 10 µM. Also, the in situ biosensing ability in the HEK-293 and PC12 cell lines was evaluated by the addition of PMA. The nanocomposite showed the ability to detect the released H 2 O 2 after adding the minimum amount of 120 ng/mL of the PMA.
Publisher: Growing Science
Date: 2022
Abstract: This study aims to examine the impact of minority investor protection mechanisms on agency costs. All relevant indicators of minority investor protection adapted from the World Bank’s annual ‘Doing Business’ reports, along with concentrated government ownership, are employed with a panel data s le of 135 Vietnamese listed firms during the period 2014–2018. It is found that the following mechanisms are effective in mitigating agency costs and hence agency problems at the firm level: 1) review and approval requirements for related-party transactions 2) minority shareholders’ ability to sue and hold directors liable for their duties 3) minority shareholders’ access to internal corporate documents 4) investors’ rights to approve major corporate investment and sale of asset decisions and 5) disclosure in annual reports of salaries, bonuses and other forms of remuneration to directors and management. Interestingly, board independence and controlling government shareholders are not confirmed to play significant roles in addressing agency problems. To the best of the authors’ knowledge, this is the first attempt at testing for the impact of minority investor protection mechanisms developed by the World Bank on agency costs at the firm level, hence providing empirical evidence for the adoption of the minority investor protection mechanisms promoted by the World Bank. This study also provides policy implications for selecting effective mechanisms to mitigate agency conflicts between controlling shareholders and minority investors in order to enhance the financial performance of firms in an Asian emerging market.
Publisher: Springer Science and Business Media LLC
Date: 07-2022
DOI: 10.1186/S13046-022-02406-1
Abstract: One of the most malignant tumors in men is prostate cancer that is still incurable due to its heterogenous and progressive natures. Genetic and epigenetic changes play significant roles in its development. The RNA molecules with more than 200 nucleotides in length are known as lncRNAs and these epigenetic factors do not encode protein. They regulate gene expression at transcriptional, post-transcriptional and epigenetic levels. LncRNAs play vital biological functions in cells and in pathological events, hence their expression undergoes dysregulation. The role of epigenetic alterations in prostate cancer development are emphasized here. Therefore, lncRNAs were chosen for this purpose and their expression level and interaction with other signaling networks in prostate cancer progression were examined. The aberrant expression of lncRNAs in prostate cancer has been well-documented and progression rate of tumor cells are regulated via affecting STAT3, NF-κB, Wnt, PI3K/Akt and PTEN, among other molecular pathways. Furthermore, lncRNAs regulate radio-resistance and chemo-resistance features of prostate tumor cells. Overexpression of tumor-promoting lncRNAs such as HOXD-AS1 and CCAT1 can result in drug resistance. Besides, lncRNAs can induce immune evasion of prostate cancer via upregulating PD-1. Pharmacological compounds such as quercetin and curcumin have been applied for targeting lncRNAs. Furthermore, siRNA tool can reduce expression of lncRNAs thereby suppressing prostate cancer progression. Prognosis and diagnosis of prostate tumor at clinical course can be evaluated by lncRNAs. The expression level of exosomal lncRNAs such as lncRNA-p21 can be investigated in serum of prostate cancer patients as a reliable biomarker.
Publisher: Springer Science and Business Media LLC
Date: 10-2019
DOI: 10.1007/S10856-019-6319-6
Abstract: Nowadays, due to a growing number of tissue injuries, in particular, skin wounds, induction and promotion of tissue healing responses can be considered as a crucial step towards a complete regeneration. Recently, biomaterial design has been oriented towards promoting a powerful, effective, and successful healing. Biomaterials with wound management abilities have been developed for different applications such as providing a native microenvironment and supportive matrices that induce the growth of tissue, creating physical obstacles against microbial contamination, and to be used as delivery systems for therapeutic reagents. Until now, numerous strategies aiming to accelerate the wound healing process have been utilized and studied with their own pros and cons. In this review, tissue remodeling phenomena, wound healing mechanisms, and their related factors will be discussed. In addition, different methods for induction and acceleration of healing via cell therapy, bioactive therapeutic delivery, and/or biomaterial-based approaches will be reviewed.
Publisher: Bentham Science Publishers Ltd.
Date: 23-01-2020
DOI: 10.2174/1573412914666181017134015
Abstract: In this work, a novel and extra sensitive blood s le determination method for on-line monitoring of Daptomycin is represented. This technique is in accordance with the electro-membrane extraction (EME) and stripping fast Fourier transform continuous cyclic voltammetry (SFFTCCV) coupling. Briefly, the potential waveform had become constantly utilized over a Gold Electrode and the electrode impulse was acquired by taking away the base current and developing the current in the particular potential area of oxidation of s le. This method was performed by utilizing a DC potential and migration of Daptomycin from the analyte fluid to the layer of 4-methyl-2-pentanol as well as following migration to the acceptor fluid. A low and valuable detection limit of 3.5 ng ml-1 and quantification limit of 10.2 ng ml-1 are considered as a part of the sensible results of this experiment. Furthermore, efficient linearity in the range of 10.0-600 ng ml-1 was observed.
Publisher: Elsevier BV
Date: 11-2023
Publisher: Elsevier BV
Date: 2023
DOI: 10.1016/J.ENVRES.2022.114803
Abstract: Today, researchers have focused on the application of environmentally-benign and sustainable micro- and nanosystems for drug delivery and cancer therapy. Compared to conventional chemotherapeutics, advanced micro- and nanosystems designed by applying abundant, natural, and renewable feedstocks have shown biodegradability, biocompatibility, and low toxicity advantages. However, important aspects of toxicological assessments, clinical translational studies, and suitable functionalization/modification still need to be addressed. Herein, the benefits and challenges of green nanomedicine in cancer nanotherapy and targeted drug delivery are cogitated using nanomaterials designed by exploiting natural and renewable resources. The application of nanomaterials accessed from renewable natural resources, comprising metallic nanomaterials, carbon-based nanomaterials, metal-organic frameworks, natural-derived nanomaterials, etc. for targeted anticancer drug delivery and cancer nanotherapy are deliberated, with emphasis on important limitations/challenges and future perspectives.
Publisher: Springer Science and Business Media LLC
Date: 18-08-2021
Publisher: Elsevier BV
Date: 06-2020
Publisher: American Chemical Society (ACS)
Date: 21-06-2021
Publisher: Royal Society of Chemistry (RSC)
Date: 2022
DOI: 10.1039/D2NH00214K
Abstract: Polysaccharides (PSA) have taken specific position among biomaterials for advanced applications in medicine.
Publisher: Elsevier BV
Date: 12-2019
Publisher: Elsevier BV
Date: 08-2023
Publisher: Springer Science and Business Media LLC
Date: 16-10-2019
DOI: 10.1038/S41586-019-1545-0
Abstract: Since 2000, many countries have achieved considerable success in improving child survival, but localized progress remains unclear. To inform efforts towards United Nations Sustainable Development Goal 3.2—to end preventable child deaths by 2030—we need consistently estimated data at the subnational level regarding child mortality rates and trends. Here we quantified, for the period 2000–2017, the subnational variation in mortality rates and number of deaths of neonates, infants and children under 5 years of age within 99 low- and middle-income countries using a geostatistical survival model. We estimated that 32% of children under 5 in these countries lived in districts that had attained rates of 25 or fewer child deaths per 1,000 live births by 2017, and that 58% of child deaths between 2000 and 2017 in these countries could have been averted in the absence of geographical inequality. This study enables the identification of high-mortality clusters, patterns of progress and geographical inequalities to inform appropriate investments and implementations that will help to improve the health of all populations.
Publisher: Wiley
Date: 11-05-2023
DOI: 10.1002/MED.21971
Publisher: Springer Science and Business Media LLC
Date: 17-03-2023
Publisher: Elsevier BV
Date: 05-2023
Publisher: Elsevier BV
Date: 11-2018
Publisher: Elsevier BV
Date: 11-2022
Publisher: MDPI AG
Date: 21-09-2022
DOI: 10.3390/MOLECULES27196186
Abstract: Today, sustainable and natural resources including biowastes have been considered attractive starting materials for the fabrication of biocompatible and biodegradable carbon dots (CDs) due to the benefits of availability, low cost, biorenewability, and environmentally benign attributes. These carbonaceous nanomaterials have been widely explored in the field of sensing/imaging, optoelectronics, photocatalysis, drug/gene delivery, tissue engineering, regenerative medicine, and cancer theranostics. Designing multifunctional biowaste-derived CDs with a high efficacy-to-toxicity ratio for sustained and targeted drug delivery, along with imaging potentials, opens a new window of opportunity toward theranostic applications. However, crucial challenges regarding the absorption/emission wavelength, up-conversion emission/multiphoton fluorescence mechanisms, and phosphorescence of these CDs still need to be addressed to attain the maximum functionality and efficacy. Future studies ought to focus on optimizing the synthesis techniques/conditions, evaluating the influence of nucleation/growth process on structures roperties, controlling their morphology/size, and finding the photoluminescence mechanisms. Reproducibility of synthesis techniques is another critically important factor that needs to be addressed in the future. Herein, the recent developments related to the biowaste-derived CDs with respect to their biomedical applications are deliberated, focusing on important challenges and future perspectives.
Publisher: Elsevier BV
Date: 07-2022
Publisher: Elsevier BV
Date: 2020
Publisher: Elsevier BV
Date: 07-2019
Publisher: MDPI AG
Date: 07-12-2021
DOI: 10.20944/PREPRINTS202112.0102.V1
Abstract: There was a question on “how lanthanides doping in iron oxide affects cure kinetics of epoxy-based nanocomposites?” To answer, we synthesized samarium (Sm)-doped Fe3O4 nanoparticles via electrochemical method and characterized it using FTIR, XRD, FE-SEM, EDX, TEM, and XPS analyses. The magnetic particles were uniformly dispersed in epoxy resin to increase the curability of the epoxy/amine system. The effect of the lanthanide dopant on the curing reaction of epoxy with amine was explored by modeling DSC experimental data based on model-free methodology. It was found that Sm3+ in the structure of Fe3O4 crystal participates in cross-linking of epoxy by catalyzing the reaction between epoxide rings and amine groups of curing agents. In addition, the etherification reaction of active OH groups on the surface of nanoparticles reacts with epoxy rings which prolongs the reaction time at the late stage of reaction where diffusion is the dominant mechanism.
Publisher: Elsevier BV
Date: 2022
Publisher: AIP Publishing
Date: 03-2022
DOI: 10.1063/5.0047672
Abstract: In recent years, the role of optically sensitive nanomaterials has become powerful moieties in therapeutic techniques and has become particularly emphasized. Currently, by the extraordinary development of nanomaterials in different fields of medicine, they have found new applications. Phototherapy modalities, such as photothermal therapy (PTT) by toxic heat generation and photodynamic therapy (PDT) by reactive oxygen species, are known as promising phototherapeutic techniques, which can overcome the limitations of conventional protocols. Moreover, nanomaterial-based PDT and PTT match the simultaneous immune therapy and increase the immune system stimulation resulting from the denaturation of cancer cells. Nevertheless, nanomaterials should have sufficient biocompatibility and efficiency to meet PDT and PTT requirements as therapeutic agents. The present review focuses on the therapeutic potency of PDT, PTT, and also their combined modalities, which are known alternative protocols with minimal morbidity integrated into gold standard treatments such as surgery, chemotherapy, and radiation therapy at tumor treatment and cancer-related infectious diseases. In addition, for deeper understanding, photoablation effects with emphasis on the nature, morphology, and size of photosensitive nanomaterials in PDT and PTT were studied. Finally, transportation techniques and moieties needed as carriers of photosensitizers and photothermal therapy agents to hard-accessed regions, for ex le, cancerous regions, were investigated.
Publisher: MDPI AG
Date: 30-06-2021
DOI: 10.3390/MA14133652
Abstract: The composition and topology of metal-organic frameworks (MOFs) are exceptionally tailorable moreover, they are extremely porous and represent an excellent Brunauer–Emmett–Teller (BET) surface area (≈3000–6000 m2·g−1). Nanoscale MOFs (NMOFs), as cargo nanocarriers, have increasingly attracted the attention of scientists and biotechnologists during the past decade, in parallel with the evolution in the use of porous nanomaterials in biomedicine. Compared to other nanoparticle-based delivery systems, such as porous nanosilica, nanomicelles, and dendrimer-encapsulated nanoparticles, NMOFs are more flexible, have a higher biodegradability potential, and can be more easily functionalized to meet the required level of host–guest interactions, while preserving a larger and fully adjustable pore window in most cases. Due to these unique properties, NMOFs have the potential to carry anticancer cargos. In contrast to almost all porous materials, MOFs can be synthesized in erse morphologies, including spherical, ellipsoidal, cubic, hexagonal, and octahedral, which facilitates the acceptance of various drugs and genes.
Publisher: SAGE Publications
Date: 02-03-2020
Abstract: Government and nongovernmental organizations need national and global estimates on the descriptive epidemiology of common oral conditions for policy planning and evaluation. The aim of this component of the Global Burden of Disease study was to produce estimates on prevalence, incidence, and years lived with disability for oral conditions from 1990 to 2017 by sex, age, and countries. In addition, this study reports the global socioeconomic pattern in burden of oral conditions by the standard World Bank classification of economies as well as the Global Burden of Disease Socio-demographic Index. The findings show that oral conditions remain a substantial population health challenge. Globally, there were 3.5 billion cases (95% uncertainty interval [95% UI], 3.2 to 3.7 billion) of oral conditions, of which 2.3 billion (95% UI, 2.1 to 2.5 billion) had untreated caries in permanent teeth, 796 million (95% UI, 671 to 930 million) had severe periodontitis, 532 million (95% UI, 443 to 622 million) had untreated caries in deciduous teeth, 267 million (95% UI, 235 to 300 million) had total tooth loss, and 139 million (95% UI, 133 to 146 million) had other oral conditions in 2017. Several patterns emerged when the World Bank’s classification of economies and the Socio-demographic Index were used as indicators of economic development. In general, more economically developed countries have the lowest burden of untreated dental caries and severe periodontitis and the highest burden of total tooth loss. The findings offer an opportunity for policy makers to identify successful oral health strategies and strengthen them introduce and monitor different approaches where oral diseases are increasing plan integration of oral health in the agenda for prevention of noncommunicable diseases and estimate the cost of providing universal coverage for dental care.
Publisher: American Chemical Society
Date: 15-05-2023
Publisher: Wiley
Date: 03-02-2020
DOI: 10.1002/AOC.5531
Publisher: Elsevier BV
Date: 08-2022
Publisher: Royal Society of Chemistry (RSC)
Date: 2021
DOI: 10.1039/D1GC00639H
Abstract: Synthetic methods of QDs from low cost and natural resources.
Publisher: MDPI AG
Date: 23-11-2020
DOI: 10.3390/NANO10112320
Abstract: Decorating photocatalysts with noble metal nanoparticles (e.g., Pt) often increases the catalysts’ photocatalytic activity and biomedical properties. Here, a simple and inexpensive method has been developed to prepare a Pt-Ag3PO4/CdS/chitosan composite, which was characterized and used for the visible light-induced photocatalytic and antibacterial studies. This synthesized composite showed superior photocatalytic activity for methylene blue degradation as a hazardous pollutant (the maximum dye degradation was observed in 90 min of treatment) and killing of Gram positive bacterial (Staphylococcus aureus and Bacillus cereus) as well as Gram negative bacteria (Klebsiella pneumoniae, Salmonella typhimurium, Escherichia coli, and Pseudomonas aeruginosa) under visible light irradiation. The antibacterial activity of CdS, CdS/Ag3PO4, and Pt-Ag3PO4/CdS/chitosan against E. coli, Pseudomonas aeruginosa, Salmonella typhimurium, Klebsiella pneumoniae, Staphylococcus aureus, and Bacillus cereus showed the zone of inhibition (mm) under visible light and under dark conditions at a concentration of 20 µg mL−1. Furthermore, the cell viability of the CdS/chitosan, Ag3PO4, Ag3PO4/CdS/chitosan, and Pt-Ag3PO4/CdS/chitosan were investigated on the human embryonic kidney 293 cells (HEK-293), Henrietta Lacks (HeLa), human liver cancer cell line (HepG2), and pheochromocytoma (PC12) cell lines. In addition, the results indicated that the photodegradation rate for Pt-Ag3PO4/CdS/chitosan is 3.53 times higher than that of CdS and 1.73 times higher than that of the CdS/Ag3PO4 composite. Moreover, Pt-Ag3PO4/CdS/chitosan with an optimal amount of CdS killed large areas of different bacteria and different cells separately in a shorter time period under visible-light irradiation, which shows significantly higher efficiency than pure CdS and other CdS/Ag3PO4 composites. The superb performances of this composite are attributed to its privileged properties, such as retarded recombination of photoinduced electron/hole pairs and a large specific surface area, making Pt-Ag3PO4/CdS/chitosan a valuable composite that can be deployed for a range of important applications, such as visible light-induced photocatalysis and antibacterial activity.
Publisher: Informa UK Limited
Date: 22-08-2022
DOI: 10.1080/17425247.2022.2112944
Abstract: Three-dimensional (3D) printing, also known as additive manufacturing (AM), is a modern technique/technology, which makes it possible to construct 3D objects from computer-aided design (CAD) digital models. This technology can be used in the progress of drug delivery systems, where porosity has played important role in attaining an acceptable level of biocompatibility and biodegradability with improved therapeutic effects. 3D printing may also provide the user possibility to control the dosage of each ingredient in order to a specific purpose, and makes it probable to improve the formulation of drug delivery systems. This article covers the 3D printing technologies, bioactive materials including natural and synthetic polymers as well as some ceramics and minerals and their roles in drug delivery systems. This technology is feasible to fabricate drug products by incorporating multiple drugs in different parts in such a mode that these drugs can release from the section at a predetermined rate. Furthermore, this 3D printing technology has the potential to transform personalized therapy to various age-groups by design flexibility and precise dosing. In recent years, the potential use of this technology can be realized in a clinical situation where patients will acquire in idualized medicine as per their requirement.
Publisher: Springer Science and Business Media LLC
Date: 25-10-2022
DOI: 10.1038/S41467-022-33627-9
Abstract: Snakebite envenoming is an important cause of preventable death. The World Health Organization (WHO) set a goal to halve snakebite mortality by 2030. We used verbal autopsy and vital registration data to model the proportion of venomous animal deaths due to snakes by location, age, year, and sex, and applied these proportions to venomous animal contact mortality estimates from the Global Burden of Disease 2019 study. In 2019, 63,400 people (95% uncertainty interval 38,900–78,600) died globally from snakebites, which was equal to an age-standardized mortality rate (ASMR) of 0.8 deaths (0.5–1.0) per 100,000 and represents a 36% (2–49) decrease in ASMR since 1990. India had the greatest number of deaths in 2019, equal to an ASMR of 4.0 per 100,000 (2.3—5.0). We forecast mortality will continue to decline, but not sufficiently to meet WHO’s goals. Improved data collection should be prioritized to help target interventions, improve burden estimation, and monitor progress.
Publisher: Informa UK Limited
Date: 23-08-2022
Publisher: MDPI AG
Date: 13-08-2021
DOI: 10.3390/MOLECULES26164920
Abstract: Introduction: Chemotherapy with anti-cancer drugs is considered the most common approach for killing cancer cells in the human body. However, some barriers such as toxicity and side effects would limit its usage. In this regard, nano-based drug delivery systems have emerged as cost-effective and efficient for sustained and targeted drug delivery. Nanotubes such as carbon nanotubes (CNT) and boron nitride nanotubes (BNNT) are promising nanocarriers that provide the cargo with a large inner volume for encapsulation. However, understanding the insertion process of the anti-cancer drugs into the nanotubes and demonstrating drug-nanotube interactions starts with theoretical analysis. Methods: First, interactions parameters of the atoms of 5-FU were quantified from the DREIDING force field. Second, the storage capacity of BNNT (8,8) was simulated to count the number of drugs 5-FU encapsulated inside the cavity of the nanotubes. In terms of the encapsulation process of the one drug 5-FU into nanotubes, it was clarified that the drug 5-FU was more rapidly adsorbed into the cavity of the BNNT compared with the CNT due to the higher van der Waals (vdW) interaction energy between the drug and the BNNT. Results: The obtained values of free energy confirmed that the encapsulation process of the drug inside the CNT and BNNT occurred spontaneously with the free energies of −14 and −25 kcal·mol−1, respectively. Discussion: However, the lower value of the free energy in the system containing the BNNT unraveled more stability of the encapsulated drug inside the cavity of the BNNT comparing the system having CNT. The encapsulation of Fluorouracil (5-FU) anti-cancer chemotherapy drug (commercial name: Adrucil®) into CNT (8,8) and BNNT (8,8) with the length of 20 Å in an aqueous solution was discussed herein applying molecular dynamics (MD) simulation.
Publisher: MDPI AG
Date: 17-11-2021
DOI: 10.3390/BIOM11111714
Abstract: Metal–organic frameworks (MOFs) have been widely used as porous nanomaterials for different applications ranging from industrial to biomedicals. An unpredictable one-pot method is introduced to synthesize NH2-MIL-53 assisted by high-gravity in a greener media for the first time. Then, porphyrins were deployed to adorn the surface of MOF to increase the sensitivity of the prepared nanocomposite to the genetic materials and in-situ cellular protein structures. The hydrogen bond formation between genetic domains and the porphyrin’ nitrogen as well as the surface hydroxyl groups is equally probable and could be considered a milestone in chemical physics and physical chemistry for biomedical applications. In this context, the role of incorporating different forms of porphyrins, their relationship with the final surface morphology, and their drug/gene loading efficiency were investigated to provide a predictable pattern in regard to the previous works. The conceptual phenomenon was optimized to increase the interactions between the biomolecules and the substrate by reaching the limit of detection to 10 pM for the Anti-cas9 protein, 20 pM for the single-stranded DNA (ssDNA), below 10 pM for the single guide RNA (sgRNA) and also around 10 nM for recombinant SARS-CoV-2 spike antigen. Also, the MTT assay showed acceptable relative cell viability of more than 85% in most cases, even by increasing the dose of the prepared nanostructures.
Publisher: Elsevier BV
Date: 10-2019
Publisher: Springer Science and Business Media LLC
Date: 04-11-2019
DOI: 10.1007/S10544-019-0439-0
Abstract: Microfluidic systems (MFS) provide a range of advantages in biomedical applications, including improved controllability of material characteristics and lower consumption of reagents, energy, time and money. Fabrication of MFS employs various materials, such as glass, silicon, ceramics, paper, and metals such as gold, copper, aluminum, chromium and titanium. In this review, gold thin film microfluidic channels (GTFMFC) are discussed with reference to fabrication methods and their erse use in chemical and biomedical applications. The advantages of gold thin films (GTF) include flexibility, ease of manufacture, adhesion to polymer surfaces, chemical stability, good electrical conductivity, surface plasmon resonance effects, ability to be chemically functionalized, etc. Various electroactuators and electroanalytical devices can incorporate GTF. GTF-based MFS have been used in environmental monitoring, assays of biomarkers, immunoassays, cell culture studies and pathogen identification.
Publisher: MDPI AG
Date: 27-02-2022
DOI: 10.3390/MA15051799
Abstract: Several pieces of research have been done on transition metal nanoparticles and their nanocomplexes as research on their physical and chemical properties and their relationship to biological features are of great importance. Among all their biological properties, the antibacterial and antimicrobial are especially important due to their high use for human needs. In this article, we will discuss the different synthesis and modification methods of silver (Ag) and gold (Au) nanoparticles and their physicochemical properties. We will also review some state-of-art studies and find the best relationship between the nanoparticles’ physicochemical properties and potential antimicrobial activity. The possible antimicrobial mechanism of these types of nanoparticles will be discussed in-depth as well.
Publisher: Elsevier BV
Date: 10-2018
Publisher: Elsevier BV
Date: 09-2020
Publisher: Elsevier BV
Date: 07-2023
Publisher: Wiley
Date: 15-08-2022
Abstract: Conventional drug delivery systems are challenged by concerns related to systemic toxicity, repetitive doses, drug concentrations fluctuation, and adverse effects. Various drug delivery systems are developed to overcome these limitations. Nanomaterials are employed in a variety of biomedical applications such as therapeutics delivery, cancer therapy, and tissue engineering. Physiochemical nanoparticle assembly techniques involve the application of solvents and potentially harmful chemicals, commonly at high temperatures. Genetically engineered organisms have the potential to be used as promising candidates for greener, efficient, and more adaptable platforms for the synthesis and assembly of nanomaterials. Genetically engineered carriers are precisely designed and constructed in shape and size, enabling precise control over drug attachment sites. The high accuracy of these novel advanced materials, biocompatibility, and stimuli‐responsiveness, elucidate their emerging application in controlled drug delivery. The current article represents the research progress in developing various genetically engineered carriers. Organic‐based nanoparticles including cellulose, collagen, silk‐like polymers, elastin‐like protein, silk‐elastin‐like protein, and inorganic‐based nanoparticles are discussed in detail. Afterward, viral‐based carriers are classified, and their potential for targeted therapeutics delivery is highlighted. Finally, the challenges and prospects of these delivery systems are concluded.
Publisher: MDPI AG
Date: 13-10-2022
DOI: 10.3390/PHARMACEUTICS14102182
Abstract: The functionalization of nanomaterials with suitable capping ligands or bioactive agents is an interesting strategy in designing nanosystems with suitable applicability and biocompatibility the physicochemical and biological properties of these nanomaterials can be highly improved for biomedical applications. In this context, numerous explorations have been conducted in the functionalization of silver (Ag) and gold (Au) nanomaterials using suitable functional groups or agents to design nanosystems with unique physicochemical properties such as excellent biosensing capabilities, biocompatibility, targeting features, and multifunctionality for biomedical purposes. Future studies should be undertaken for designing novel functionalization tactics to improve the properties of Au- and Ag-based nanosystems and reduce their toxicity. The possible release of cytotoxic radicals or ions, the internalization of nanomaterials, the alteration of cellular signaling pathways, the translocation of these nanomaterials across the cell membranes into mitochondria, DNA damages, and the damage of cell membranes are the main causes of their toxicity, which ought to be comprehensively explored. In this study, recent advancements in diagnostic and therapeutic applications of functionalized Au and Ag nanomaterials are deliberated, focusing on important challenges and future directions.
Publisher: Springer Science and Business Media LLC
Date: 15-07-2022
DOI: 10.1038/S41598-022-16058-W
Abstract: The aim of this work was to provide a novel approach to designing and synthesizing a nanocomposite with significant biocompatibility, biodegradability, and stability in biological microenvironments. Hence, the porous ultra-low-density materials, metal–organic frameworks (MOFs), have been considered and the MIL-125(Ti) has been chosen due to its distinctive characteristics such as great biocompatibility and good biodegradability immobilized on the surface of the reduced graphene oxide (rGO). Based on the results, the presence of transition metal complexes next to the drug not only can reinforce the stability of the drug on the structure by preparing π–π interaction between ligands and the drug but also can enhance the efficiency of the drug by preventing the spontaneous release. The effect of utilizing transition metal complex beside drug (Doxorubicin (DOX)) on the drug loading, drug release, and antibacterial activity of prepared nanocomposites on the P. aeruginosa and S. aureus as a model bacterium has been investigated and the results revealed that this theory leads to increasing about 200% in antibacterial activity. In addition, uptake, the release of the drug, and relative cell viabilities (in vitro and in vivo) of prepared nanomaterials and biomaterials have been discussed. Based on collected data, the median size of prepared nanocomposites was 156.2 nm, and their biological stability in PBS and DMEM + 10% FBS was screened and revealed that after 2.880 min, the nanocomposite’s size reached 242.3 and 516 nm respectively. The MTT results demonstrated that immobilizing PdL beside DOX leads to an increase of more than 15% in the cell viability. It is noticeable that the AST:ALT result of prepared nanocomposite was under 1.5.
Publisher: Royal Society of Chemistry (RSC)
Date: 2023
DOI: 10.1039/D3SE00696D
Publisher: Informa UK Limited
Date: 06-2020
DOI: 10.2147/IJN.S248736
Publisher: Springer Science and Business Media LLC
Date: 20-04-2020
DOI: 10.1038/S41591-020-0807-6
Abstract: A double burden of malnutrition occurs when in iduals, household members or communities experience both undernutrition and overweight. Here, we show geospatial estimates of overweight and wasting prevalence among children under 5 years of age in 105 low- and middle-income countries (LMICs) from 2000 to 2017 and aggregate these to policy-relevant administrative units. Wasting decreased overall across LMICs between 2000 and 2017, from 8.4% (62.3 (55.1–70.8) million) to 6.4% (58.3 (47.6–70.7) million), but is predicted to remain above the World Health Organization’s Global Nutrition Target of % in over half of LMICs by 2025. Prevalence of overweight increased from 5.2% (30 (22.8–38.5) million) in 2000 to 6.0% (55.5 (44.8–67.9) million) children aged under 5 years in 2017. Areas most affected by double burden of malnutrition were located in Indonesia, Thailand, southeastern China, Botswana, Cameroon and central Nigeria. Our estimates provide a new perspective to researchers, policy makers and public health agencies in their efforts to address this global childhood syndemic.
Publisher: American Chemical Society
Date: 15-09-2023
Publisher: Springer Science and Business Media LLC
Date: 22-04-2021
DOI: 10.1038/S41598-021-88058-1
Abstract: Bioactive glasses (BGs) have attracted added attention in the structure of the scaffolds for bone repair applications. Different metal ions could be doped in BGs to induce specific biological responses. Among these ions, strontium (Sr) is considered as an effective and safe doping element with promising effects on bone formation and regeneration. In this experiment, we evaluated the antibacterial activities of the gelatin-BG (Gel-BG) and Gel-BG/Sr scaffolds in vitro. The osteogenic properties of the prepared scaffolds were also assessed in rabbit calvarial bone defects for 12 weeks. Both scaffolds showed in vivo bone formation during 12 weeks with the newly formed bone area in Gel-BG/Sr scaffold was higher than that in Gel-BG scaffolds after the whole period. Based on the histological results, Gel-BG/Sr exhibited acceleration of early-stage bone formation in vivo. The results of antibacterial investigation for both scaffolds showed complete growth inhibition against Escherichia coli ( E. coli ). Although Gel-BG revealed no antibacterial effect on Staphylococcus aureus ( S. aureus ), the Gel-BG/Sr was able to partially inhibit the growth of S. aureus , as detected by threefold reduction in growth index. Our results confirmed that Sr doped BG is a favorable candidate for bone tissue engineering with superior antibacterial activity and bone regeneration capacity compared with similar counterparts having no Sr ion.
Publisher: MDPI AG
Date: 12-06-2021
DOI: 10.3390/MOLECULES26123611
Abstract: The rise of antimicrobial resistance to antibiotics (AMR) as a healthcare crisis has led to a tremendous social and economic impact, whose damage poses a significant threat to future generations. Current treatments either are less effective or result in further acquired resistance. At the same time, several new antimicrobial discovery approaches are expensive, slow, and relatively poorly equipped for translation into the clinical world. Therefore, the use of nanomaterials is presented as a suitable solution. In particular, this review discusses selenium nanoparticles (SeNPs) as one of the most promising therapeutic agents based in the nanoscale to treat infections effectively. This work summarizes the latest advances in the synthesis of SeNPs and their progress as antimicrobial agents using traditional and biogenic approaches. While physiochemical methods produce consistent nanostructures, along with shortened processing procedures and potential for functionalization of designs, green or biogenic synthesis represents a quick, inexpensive, efficient, and eco-friendly approach with more promise for tunability and versatility. In the end, the clinical translation of SeNPs faces various obstacles, including uncertain in vivo safety profiles and mechanisms of action and unclear regulatory frameworks. Nonetheless, the promise possessed by these metalloid nanostructures, along with other nanoparticles in treating bacterial infections and slowing down the AMR crisis, are worth exploring.
Publisher: Elsevier BV
Date: 04-2020
Publisher: Informa UK Limited
Date: 13-07-2023
Publisher: Elsevier BV
Date: 12-2019
DOI: 10.1016/J.IJBIOMAC.2019.09.060
Abstract: Recently, nanocomposite nanofibers have been extensively used for biomedical applications. It is expected that simultaneous incorporation of antibiotic drugs and ZnO nanoparticles into nanofiber resulted in providing the synergistic anti-bacterial effect. The main aim of the present study is to fabricate polyvinyl alcohol (PVA)/carboxymethyl cellulose (CMC)-ZnO nanocomposite fibrous mats containing erythromycin (EM) drug and crosslink them using 2% glutaraldehyde vapor and 3% AlCl
Publisher: Royal Society of Chemistry (RSC)
Date: 2018
DOI: 10.1039/C8AN00731D
Abstract: Colloidal inorganic nanoparticles have wide applications in the detection of analytes and in biological assays.
Publisher: Informa UK Limited
Date: 27-05-2020
Publisher: IOP Publishing
Date: 2018
Publisher: Elsevier BV
Date: 06-2020
Publisher: Elsevier BV
Date: 10-2022
Publisher: Springer Science and Business Media LLC
Date: 08-06-2022
DOI: 10.1038/S41598-022-13431-7
Abstract: Doxorubicin (DOX) is a potent anti-cancer agent and there have been attempts in developing nanostructures for its delivery to tumor cells. The nanoparticles promote cytotoxicity of DOX against tumor cells and in turn, they reduce adverse impacts on normal cells. The safety profile of nanostructures is an important topic and recently, the green synthesis of nanoparticles has obtained much attention for the preparation of biocompatible carriers. In the present study, we prepared layered double hydroxide (LDH) nanostructures for doxorubicin (DOX) delivery. The Cu–Al LDH nanoparticles were synthesized by combining Cu(NO 3 ) 2 ·3H 2 O and Al(NO 3 ) 3 ·9H 2 O, and then, autoclave at 110. The green modification of LDH nanoparticles with Plantago ovata (PO) was performed and finally, DOX was loaded onto nanostructures. The FTIR, XRD, and FESEM were employed for the characterization of LDH nanoparticles, confirming their proper synthesis. The drug release study revealed the pH-sensitive release of DOX (highest release at pH 5.5) and prolonged DOX release due to PO modification. Furthermore, MTT assay revealed improved biocompatibility of Cu–Al LDH nanostructures upon PO modification and showed controlled and low cytotoxicity towards a wide range of cell lines. The CLSM demonstrated cellular uptake of nanoparticles, both in the HEK-293 and MCF-7 cell lines however, the results were showed promising cellular internalizations to the HEK-293 rather than MCF-7 cells. The in vivo experiment highlighted the normal histopathological structure of kidneys and no side effects of nanoparticles, further confirming their safety profile and potential as promising nano-scale delivery systems. Finally, antibacterial test revealed toxicity of PO-modified Cu–Al LDH nanoparticles against Gram-positive and -negative bacteria.
Publisher: Elsevier BV
Date: 06-2020
Publisher: Elsevier BV
Date: 2020
Publisher: Wiley
Date: 04-02-2022
DOI: 10.1002/JCTB.7036
Abstract: The application of quantum dots (QDs) for detecting and treating various types of coronaviruses is very promising, as their low toxicity and high surface performance make them superior among other nanomaterials in conjugation with fluorescent probes they are promising semiconductor nanomaterials for the detection of various cellular processes and viral infections. In view of the successful results for inhibiting SARS‐CoV‐2, functional QDs could serve eminent role in the growth of safe nanotherapy for the cure of viral infections in the near future their large surface areas help bind numerous molecules post‐synthetically. Functionalized QDs with high functionality, targeted selectivity, stability and less cytotoxicity can be employed for highly sensitive co‐delivery and imaging/diagnosis. Besides, due to the importance of safety and toxicity issues, QDs prepared from plant sources (e.g. curcumin) are much more attractive, as they provide good biocompatibility and low toxicity. In this review, the recent developments pertaining to the diagnostic and inhibitory potentials of QDs against SARS‐CoV‐2 are deliberated including important challenges and future outlooks. © 2022 Society of Chemical Industry (SCI).
Publisher: Wiley
Date: 09-05-2023
DOI: 10.1002/CTD2.195
Abstract: Several studies have been directed to find scalable, swift, accurate, and cost‐effective strategies for detecting, monitoring, and treating coronavirus disease 2019 (COVID‐19). Indeed, the lack of a fast and practical method for detecting the infected regions makes decision‐making challenging to combat the critical pandemic‐struck situations. The probable ‘wrong’, or rather inadequate, decisions not only have a boomerang effect on the economy but also can lead to an increase in the number of infected in iduals, degree of hospitalization, and death counts. Although the current clinical methods are effective, they are costly, time‐consuming, and, more particularly, inadequate because of the virus's mutation patterns. In addition, contamination of biomedical wastes with the COVID‐19 virus is a matter of grave concern. Therefore, there is a perpetual need for novel methodologies to delineate the contaminated regions and determine whether those viruses contaminate the wastewater. Although several review papers have been recently published to discuss those concerns, there is a lack of a comprehensive survey of the detection and treatment of the COVID‐19 virus in aqueous media. Herein, we review techniques available as spreading signifiers for detecting the COVID‐19 virus in water resources and wastewater. We classify and integrate techniques into wastewater, sewage, and sludge detection and monitoring. Treatment of COVID‐19‐contaminated wastewater is discussed by classifying and ranking the methodologies nurtured from nanotechnology, including nanoparticle‐based biosensors used in the detection and nanotechnology‐based filtration systems for the removal of COVID‐19 from wastewater. We also highlight the compilation of the detection methodologies in contaminated aqueous media and provide insight into the challenges associated with treating COVID‐19‐contaminated wastewater. The article concludes that international and robust guidelines for virus/bacteria treatment in wastewater are urgently needed to protect the environment and public health, where nanotechnology plays a key role.
Publisher: Elsevier BV
Date: 12-2019
Publisher: Wiley
Date: 07-12-2022
DOI: 10.1002/AOC.6970
Abstract: A novel form of nanocomposite based on bioactive glass (BG) and CuAl LDH has been devised and manufactured for the first time in this paper. The produced nanocomposites, BG@CuAl LDH and BG@CuAl LDH@RO, were employed to examine the ability of the alkaline phosphatase activity to regulate the expression of COL 1, OCN and RUNX2 (ALP) gene expressions. The role of leaf extracts ( Rosmarinus officinalis [RO]) on enhanced osteogenic gene expression has been investigated. Also, the relative cell viability has been analyzed by MTT assay on the hBMSCs, HEK‐293 and PC12 cell lines after 24 and 48 hours of treatment. The results showed significantly increased gene expressions in different microenvironments, the presence and absence of ascorbic acid and low cytotoxicity towards different cell lines. In the case of the hBMSCs cell lines, the synthesized nanomaterials' cell attachment and proliferation findings proved completely successful.
Publisher: Elsevier BV
Date: 09-2023
Publisher: IOP Publishing
Date: 29-10-2020
Abstract: Boron nitride (BN) supported palladium (Pd) nanostructured catalyst, as an alternative support for heterogeneous reduction of nitrobenzene derivatives, was prepared by a mild reduction of a Pd precursor in water. The structural characteristics and distribution of the synthesized Pd nanoparticles (NPs) on BN support were investigated by transmission electron microscopy, scanning transmission electron microscopy, energy-dispersive x-ray spectroscopy and x-ray photoelectron spectroscopy methods. The potential and efficiency of the BN supported Pd NPs as an active and stable nanostructured catalyst were verified in the reduction of nitroaromatics. Excellent yields of the corresponding aryl amines in water were obtained and due discussion were included about the catalytic activity of the synthesized catalyst. It was also indicated that the nanostructured catalyst can be recycled at least for six consecutive cycles in the reduction of nitrobenzene, without losing significant activity.
Publisher: Informa UK Limited
Date: 06-2021
DOI: 10.2147/IJN.S313855
Publisher: Elsevier BV
Date: 08-2021
Location: Korea, Republic of
Location: Australia
No related grants have been discovered for Navid Rabiee.